Tag: M.W=200-300

20469-65-2, Name is 1-Bromo-3,5-dimethoxybenzene, 20469-65-2, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

Step 1: 5-bromobenzene-1,3-diol To a mixture of 1-bromo-3,5-dimethoxybenzene (15 g, 69.1 mmol) in dichloromethane (500 ml) at 0 00 was added BBr3 (14.37 ml, 152 mmol) dropwise over 5 minutes at 0 00. The reaction mixture was allowed to warm to room temperature andstirred for 5 hours. The reaction was then cooled to 0 00 and BBr3 (7.2 ml, 76 mmol) added dropwise. The reaction mixture was allowed to warm up to room temperature and stirred overnight. The reaction was again cooled to 0 00 and BBr3 (3.6 ml, 38 mmol) added dropwise. The reaction mixture was allowed to warm up to room temperature and stirred for 4 hours. The mixture was then poured slowly onto ice. When the ice melted,DCM (200 ml) was added and the layers separated. The aqueous was extracted with EtOAc (500 ml) and the layers separated. The combined organics were passed throughthrough a hydrophobic frit and concentrated. The residue was purified via flash chromatography (ISCO Combiflash Rf, 220 g column, 0-100 % ethyl acetate/hexanes) to give the title compound as a yellow oil (19.5 g, 70 % purity). MS (mlz) 189.0 (M).

Statistics shows that 1-Bromo-3,5-dimethoxybenzene is playing an increasingly important role. we look forward to future research findings about 20469-65-2.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY (NO.2) LIMITED; DOWDELL, Sarah E.; EIDAM, Hilary Schenck; ELBAN, Mark; FOX, Ryan Michael; HAMMOND, Marlys; HILFIKER, Mark A.; HOANG, Tram H.; KALLANDER, Lara S.; LAWHORN, Brian Griffin; MANNS, Sharada; PHILP, Joanne; WASHBURN, David G.; YE, Guosen; WO2015/104684; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 103291-07-2, name is 4-Bromo-1-fluoro-2-methoxybenzene, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 103291-07-2, 103291-07-2

To a solution of 69A (2.7 g, 13.1 mmol) in THF (25 mL) at -78 C. was added n-BuLi (1.6 M in hexanes, 11.0 mL, 17.7 mmol). The mixture was stirred at -78 C. for 40 min before trimethyl borate (2.7 mL, 24.3 mmol) was added. The reaction was left stirring from -78 C. to rt over 18 h. It was quenched with 1.0 N HCl (40 mL), extracted with EtOAc, washed with brine and dried over Na2SO4. After evaporation of the solvent, the crude solid product was triturated with EtOAc/hexanes (1:4). After filtration, 69B (0.75 g, 35% yield) was collected as a white solid. 1H NMR (400 MHz, Methanol-d4) delta ppm 3.86 (s, 3 H) 7.03-7.45 (m, 3 H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Bromo-1-fluoro-2-methoxybenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/3539; (2007); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

402-07-3, The chemical industry reduces the impact on the environment during synthesis 402-07-3, name is 4-Bromo-3-methoxybenzotrifluoride, I believe this compound will play a more active role in future production and life.

A vial was charged with 6-bromo-N-(4-methoxybenzyl)-N-(thiazol-2-yl)- 3,4-dihydro-2H-benzo[b][l,4]oxazine-7-sulfonamide (107.43 mg, 0.216 mmol), l-bromo-2-methoxy-4-(trifluoromethyl)benzene (Sigma-Aldrich, St. Loius, MO, 193 mg, 0.757 mmol), Xantphos (25.04 mg, 0.043 mmol), Pd2(dba)3 (19.82 mg, 0.022 mmol), and cesium carbonate (212 mg, 0.649 mmol). The vessel was flushed with Ar (g), then 1,4-dioxane (2164 mu) was added. The vessel was sealed and placed in a 100 C heating bath for 20 h. The mixture was cooled to room temperature, diluted with EtOAc, and filtered through celite. The filtrate was concentrated, and the residue was purified by chromatgraphy on silica gel (12-g Redi-Sep Gold column, 0-50% EtO Ac/Heptane) to give 6-bromo-4-(2-methoxy-4- (trifluoromethyl)phenyl)-N-(4-methoxybenzyl)-N-(thiazol-2-yl)-3,4-dihydro-2H- benzo[b][l,4]oxazine-7-sulfonamide (67 mg, 0.100 mmol, 46.2 % yield) as a yellow foam: m/z (ESI) 670.2 (M+H)+

The chemical industry reduces the impact on the environment during synthesis 4-Bromo-3-methoxybenzotrifluoride. I believe this compound will play a more active role in future production and life.

Reference:
Patent; AMGEN INC.; BOEZIO, Christiane; BOEZIO, Alessandro; BREGMAN, Howard; CHAKKA, Nagasree; COATS, James R.; COPELAND, Katrina W.; DIMAURO, Erin F.; DINEEN, Thomas; GAO, Hua; LA, Daniel; MARX, Isaac E.; NGUYEN, Hanh Nho; PETERSON, Emily Anne; WEISS, Matthew; WO2013/122897; (2013); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Some common heterocyclic compound, 54314-84-0, name is ((3-Bromopropoxy)methyl)benzene, molecular formula is C10H13BrO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 54314-84-0

b 1-(3-Benzyloxy-propyl)-5-fluoro-indole-3-carboxylic acid To a solution of a) (0.86 g, 4.45 mmol) and benzyl 3-bromopropyl ether (0.78 mL, 4.45 mmol) in dry DMF (20 mL) was added potassium carbonate (2.46 g, 17.8 mmol), and the mixture was stirred under nitrogen at room temperature overnight. The mixture was partitioned between water and ethyl acetate and the organic phase was washed with water followed by brine and concentrated. The residue was dissolved in ethanol (15 mL) and sodium hydroxide in water (25percent, 50 mL) was added. The reaction mixture was heated at 90¡ã C. for 2 hours, cooled and washed with ethyl acetate. After acidification of the aqueous phase with hydrochloric acid, the product was extracted with ethyl acetate twice. The organic layers were washed with brine, dried and concentrated affording the sub-title product as an off-white solid (1.25 g, 86percent). 1H NMR (400 MHz, CDCl3): delta7.91 (1H, s); 7.87 (1H, dd); 7.36-7.25 (6H, m); 7.01 (1H, dt); 4.46 (2H, s); 4.30 (2H, t); 3.38 (2H); 2.15-2.11 (2H, m).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 54314-84-0, its application will become more common.

Reference:
Patent; Astrazeneca AB; US6492406; (2002); B1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

The chemical industry reduces the impact on the environment during synthesis 3401-47-6, name is 1-Bromo-2-methoxynaphthalene, I believe this compound will play a more active role in future production and life. 3401-47-6

General procedure: Preparation of catalyst: 10mL flask was charged with a stirrer, Pd(OAc)2 (0.02mmol, 2mol%), ligand (Sym-Phos, PPh3, PhPCy2, S-Phos) (0.04mmol, 4mol%) and 1mL of THF. The flask was evacuated, backfilled with argon, and the reaction mixture was stirred for 10min at ambient temperature. Such prepared catalyst was used in the coupling reactions. Similarly were prepared catalysts based on PdCl2 complexes. Reaction setup. A round-bottom flask containing magnetic stir bar was charged with 15mL of 0.3% aqueous solution of SDS and base (3mmol). Then aryl halide (1mmol) dissolved in a minimum amount of THF, arylboronic acid or its derivative (1.5mmol) and the pre-catalyst (see above) were added. The flask was placed in to the oil bath (kept at 60C) and reaction mixture was stirred for next 16h. The product was filtered or extracted with methylene chloride or (3¡Á10mL), then combined organic layer was dried over MgSO4, filtered, solvent was evaporated and the product was isolated by column chromatography. Yields: 63-99%.

The chemical industry reduces the impact on the environment during synthesis 3401-47-6. I believe this compound will play a more active role in future production and life.

Reference:
Article; Demchuk, Oleg M.; Kap?on, Katarzyna; Mazur, Liliana; Strzelecka, Dorota; Pietrusiewicz, K. Micha?; Tetrahedron; vol. 72; 42; (2016); p. 6668 – 6677;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding some certain compound to certain chemical reactions, such as: 19056-41-8, name is 3-Bromo-4-methoxyaniline, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 19056-41-8. 19056-41-8

2-Amino-3′-methoxybenzophenone. In a flame-dried round bottom flask, anthranilic acid N-methoxyl-N-methylamide (8.00 g, 44.4 mmol) and m-bromoanisidine (8.31 g, 44.4 g) were dissolved in 250 mL of THF and the resulting solution was cooled to -78 C. With vigorous stirring, 2 equiv of nBuLi in hexanes (55.5 mL, 1.6 M, 88.8 mmol) was added dropwise by a syringe pump at 0.6 mL/min. After 20 min, 80 mL of 1 N hydrochloric acid was carefully added, the mixture was extracted with ethyl acetate (600 mL), and the ethyl acetate was washed with water (300 mL) and brine (300 mL), dried over sodium sulfate and concentrated in vacuo. Flash chromatography with 95:5 hexanes/ethyl acetate afforded 6.92 g (69% yield) of 2-amino-3′-methoxybenzophenone as a yellow oil.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-Bromo-4-methoxyaniline.

Reference:
Patent; Board of Regents, The University of Texas System; The Regents of the University of California; US6100254; (2000); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding some certain compound to certain chemical reactions, such as: 20469-65-2, name is 1-Bromo-3,5-dimethoxybenzene, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 20469-65-2. 20469-65-2

As follows are specific steps of: adding 3,5-dimethoxy-bromobenzene (1.74 g, 8.0 mmol, 1.0 equivalent (hereinafter referred to as ?eq?)) and a catalyst PdCl(PPh)(281 mg, 0.4 mmol, 0.05 eq) into a 100 mL Schlenk reaction flask; performing a cycle of vacuumizing and filling nitrogen gas in the flask for three times; adding dried and redistilled 1,2-dichloroethane (20 ml), triethylamine (7 ml, 40 mmol, 5.0 eq) and pinacol borane (HBpin) (3.5 ml, 24.0 mmol, 3.0 eq) into the reaction flask by a syringe; heating the reaction system to 90 C. and performing a reflux reaction for 4 hours; cooling the reaction system down to room temperature, then pouring the reaction solution into 20 ml water to terminate the reaction; extracting aqueous phases with ethyl acetate for several times and combining organic phases; washing the organic phases with a saturated saline solution and water for one time, respectively; drying with anhydrous magnesium sulfate and spin-drying the solvent; recrystallizing an obtained product in n-hexane/ethyl acetate to obtain a 1.8 g white solid with the yield of 85%. H NMR (400 MHz, CDCl) delta (ppm) 7.03 (s, 2H, benzene), 6.90 (s, 1H, benzene), 3.84 (s, 6H, -OCH3), 1.33 (s, 12H, -CH3).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1-Bromo-3,5-dimethoxybenzene.

Reference:
Patent; TECHNICAL INSTITUTE OF PHYSICS AND CHEMISTRY OF THE CHINESE ACADEMY OF SCIENCES; Li, Yi; Hao, Qingshan; Chen, Jinping; Zeng, Yi; Yu, Tianjun; US2015/353468; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

701-07-5, name is 2-(2′-Bromophenoxy)propane, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 701-07-5

N-{2-chloro-2′-[(l-methyIethyl)oxy]-4-biphenylyI}-2-[4~(ethylsuIfonyI)phenyl]acetamideA mixture of l-bromo-2-[(l-methylethyl)oxy]benzene (38 mg), N-[3-chloro-4-(4,4,5,5- tetramethyl-l}3,2-dioxaborolan-2-yl)phenyl]-2-[4-(ethylsulfonyl)phenyl]acetamide (intermediate 6b, 90 mg), PdCl2(dppf)-CH2Cl2 adduct (10 mg) and Cs2C03 (69.1 mg) in acetonitrile (1.5 mL) and water (0.5 mL) was sealed in a vessel and heated in die microwave at 100C for 30 mins. The reaction mixture was filtered through celite. The filtrate was concentrated under reduced pressure, and the residue was purified by MDAP to afford N-{2-chloro-2′-[(l-methylethyl)oxy]-4-biphenylyl}-2-[4- (etliylsulfonyl)phenyl]acetamide (12 mg) as a yellow solid. ?-NuMuKappa (600 MHz, DMSO-c ) delta ppm 1.11 (m, 9H), 3.28 (q, J= 7.2 Hz, 2H), 3.83 (s, 2H), 4.51 (m, 1H), 6.96 (t, J= 7.8 Hz, 1H), 7.09 (m, 2H), 7.22 (d, J= 6.4 Hz, 1H), 7.33 (m, 1H), 7.48 (m, 1H), 7.63 (d, J= 7.8 Hz, 2H), 7.86 (d, J= 7.8 Hz, 2H), 10.49 (s, 1H); MS(ES+) m/z Ml (MH^>.

Statistics shows that 701-07-5 is playing an increasingly important role. we look forward to future research findings about 2-(2′-Bromophenoxy)propane.

Reference:
Patent; GLAXO GROUP LIMITED; WANG, Yonghui; CAI, Wei; LIU, Qian; MENG, Qinghua; CHENG, Yaobang; YANG, Ting; ZHANG, Guifeng; XIANG, Jianing; WU, Chengde; WO2013/29338; (2013); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

588-96-5, A common compound: 588-96-5, name is p-Bromophenetole, belongs to ethers-buliding-blocks compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

General procedure: The Teflon-lined sealed tube (20 mL) was charged with a 1,4-dioxane solution of sodium fluoroalkoxide RFONa [freshly prepared from fluoroalkanol RFOH (3.3(n + 1) mmol) and Na (3.0 (n + 1) mmol) in 1,4-dioxane (5 mL)], unactivated arylbromide ArBrn (3.0 mmol), CuBr (0.3n mmol) and DMF (3.0n mmol). The sealed tube was heated to 110 C and stirred for 6 h. After the completion of reaction, the concentration of the mixture in vacuo gave a residue, to which was added methyl tert-butyl ether (MTBE, 20 mL) and diluted hydrochloric acid (10 mL, 1.0 mol/L). The organic phase was separated, and the aqueous phase was extracted with MTBE (10 mL 9 3). The combined organic layer was dried over anhydrous MgSO4, andthen concentrated in vacuo to supply a crude product. Lastly, the purification of the crude product provided the desired product via column chromatography on silica gel (eluents: petroleum ether/ethyl acetate 20:1).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, p-Bromophenetole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Guo, Ying; Li, Yu-Dao; Chen, Cheng; Zhao, Jian-Hong; Liu, Hong-Wei; Liao, Dao-Hua; Ji, Ya-Fei; Research on Chemical Intermediates; vol. 42; 3; (2016); p. 2525 – 2537;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

19056-40-7, name is 4-Bromo-3-methoxyaniline, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 19056-40-7

Step 1. 5-({[4-bromo-3-(methyloxy)phenyl]amino}methylidene)-2,2-dimethyl-1,3-dioxane-4,6-dione: 2,2-dimethyl-1,3-dioxane-4,6-dione (8.5 g, 58 mmol) in trimethyl orthoformate (50 mL, 450 mmol) was refluxed at 105 C for 1 hr. 4-Bromo-3-methoxyaniline (10.5 g, 50.4 mmol) was then added and refluxing was continued for and additional hour. The suspension was filtered, and the solid was washed with MeOH and vacuum dried to yield 5-({[4-bromo-3-(methyloxy)phenyl]amino}methylidene)-2,2-dimethyl-1,3-dioxane-4,6-dione (17 g, 49 mmol, 96 % yield). 1H NMR (400 MHz, DMSO-d) delta ppm 1.68 (s, 6H), 3.90 (s, 3H), 7.11 (dd, J = 8.6 Hz, 2 Hz, 1H), 7.43 (d, J= 2 Hz, 1H), 7.59 (d, J= 8.6 Hz, 1H), 8.64 (s, 1H), 11.23 (br. s., 1H).

Statistics shows that 19056-40-7 is playing an increasingly important role. we look forward to future research findings about 4-Bromo-3-methoxyaniline.

Reference:
Patent; GlaxoSmithKline Intellectual Property Development Limited; BURY, Michael, Jonathan; CASILLAS, Linda, N.; CHARNLEY, Adam, Kenneth; HAILE, Pamela, A.; MARQUIS, Robert, W., Jr.; MEHLMANN, John, F.; ROMANO, Joseph, J.; SINGHAUS, Robert, R.; WANG, Gren, Z.; (83 pag.)EP2680844; (2016); B1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem