Tag: M.W=100-200

Adding a certain compound to certain chemical reactions, such as: 768-70-7, name is 3-Ethynylanisole, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 768-70-7, 768-70-7

General procedure: To a mixture of alpha-azidoamide 16aa (34 mg, 0.20 mmol) and phenylacetylene (9a; 24 L,0.20 mmol) in t-BuOH/H2O (2 mL, 1:1) were added 0.5 M CuSO4 (0.020 mL, 0.010 mmol) and 1.0 M sodium ascorbate (0.020 mL, 0.020 mmol). The reaction mixture was stirred at room temperature for 1 day, and then the resulting reaction mixture was filtered. The separated solid was washed with H2O and hexanes, and triturated with hexane/EtOAc (10:1) to give the 1-morpholino-2-(4-phenyl-1H-1,2,3-triazol-1-yl)ethanone (2aaa; 52 mg, 96%) as a white solid

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Ethynylanisole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Lee, Doohyun; Kim, Daehun; Lee, Seungyeon; Kim, Taegeum; Kim, Joobin; Kim, Sohee; Liu, Kwang-Hyeon; Lee, Sangkyu; Bae, Jong-Sup; Song, Kyung-Sik; Cho, Chang-Woo; Son, Youn Kyung; Baek, Dong Jae; Lee, Taeho; Molecules; vol. 20; 11; (2015); p. 19984 – 20013;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

658-89-9, A common heterocyclic compound, 658-89-9, name is 4-(Trifluoromethoxy)benzene-1,2-diamine, molecular formula is C7H7F3N2O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1. Preparation of 83-1: HATU (3.06 g, 8.05 mmol) was added slowly to a solution of 3,3-difluoro-2-oxopent-4-enoic acid (1 .03 g, 6.86 mmol) in 10 mLof DMF. A mixture of 4-(trifluoromethoxy)benzene-1 ,2-diamine (1 .29 g, 6.71 mmol) and DIPEA (1.4 mL, 8.05 mmol) in 12 mL of DMF was then added. After stirring overnight, reaction mixture was poured into 175 mL of water and extracted with ethyl acetate (4 x 100 mL). Combined organics were washed with 50% brine, dried over anhydrous Na2504, filtered, and concentrated underreduced pressure. Resulting solid was purified via silica gel column chromatography (0-25% ethyl acetate in hexanes)to yield intermediate 83-1, the late eluting product. LCMS-ESI (m/z): [Mi-H] calcd for C12H8F5N202: 307.04; found: 307.29.

The synthetic route of 658-89-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GILEAD SCIENCES, INC.; BJORNSON, Kyla; CANALES, Eda; COTTELL, Jeromy, J.; KARKI, Kapil, Kumar; KATANA, Ashley, Anne; KATO, Darryl; KOBAYASHI, Tetsuya; LINK, John, O.; MARTINEZ, Ruben; PHILLIPS, Barton, W.; PYUN, Hyung-jung; SANGI, Michael; SCHRIER, Adam, James; SIEGEL, Dustin; TAYLOR, James, G.; TRAN, Chinh, Viet; TREJO MARTIN, Teresa, Alejandra; VIVIAN, Randall, W.; YANG, Zheng-Yu; ZABLOCKI, Jeff; ZIPFEL, Sheila; WO2014/8285; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

134364-69-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 134364-69-5, name is 2,3-Difluoroanisole belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

In 0 C next, the anhydrous aluminum chloride (1.82g, 13mmol) is added to 5-bromo-2-chlorobenzene formyl chloride 12b (3.4g, 13 . 4mmol, see example 12 step 1) and 1,2-difluoro-3-methoxybenzene 14b (2.4g, 16 . 7mmol) in dichloromethane (40 ml) in a mixed solution, in 0 C reaction under 16 hours. Maintain 0 C using hydrochloric acid solution (4 ml, 8mmol, 2M) quenching the reaction, the resulting mixture of natural temperature raising to room temperature, with methylene chloride (40 ml ¡Á 4) extraction, combined with the phase. The organic phase is dried with anhydrous sodium sulfate, filtered, filtrate concentrated to obtain title compound 14c crude product of (5.4g, yellow liquid), yield: 96.4%. The crude product is directly used for the next step synthesis.

The synthetic route of 2,3-Difluoroanisole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangdong East Sunshine Pharmaceutical Co., Ltd; Gu, Zheng; Wen, Jiaping; Tang, Wanjun; Wang, Weihua; Deng, Bingchu; Wu, Wuyong; Qu, Tong; (100 pag.)CN105461762; (2016); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

20781-20-8, A common compound: 20781-20-8, name is (2,4-Dimethoxyphenyl)methanamine, belongs to ethers-buliding-blocks compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

To a solution of compound 58 (6.6 g, 33.5 mmol) in dichloromethane (100 mL) were added DIPEA (8.65 g, 67 mmol), HOBt (5.4 g, 36.85 mmol) and EDCI (9.6 g, 50.3 mmol). After about 15 min stirring, to the homogeneous reaction mixture was added a solution of 2,4-dimethoxybenzyl amine (5.6 g, 33.5 mmol) in dichloromethane (50 mL) dropwise under nitrogen atmosphere. The resulting mixture was stirred under nitrogen atmosphere at room temperature for 16h. The reaction mixture was washed successively with IN NaOH (100 mL), water (100 mL) and brine (100 mL). The organic phase was then dried over Na2S04 and evaporated to give a crude solid product 59 that crystallized from ethyl ether. Filtration and open air suction drying afforded an off-white solid pure product 9.8g (96%), (MS: [M+l] = 347).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (2,4-Dimethoxyphenyl)methanamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; AGENEBIO, INC.; MEKONNEN, Belew; BUTERA, John, A.; HUANG, Jianxing; WO2015/95783; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 946-80-5, name is Benzyl Phenyl Ether belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. 946-80-5

Preparation of 4-benzyloxyphenylsulfonyl chloride (24-2) STR187 To a 0 C. solution of sulfonyl chloride (1.9 mL, 23.8 mmol) in 2 mL of DMF was added 4.0 g (21.7 mmol) of benzyl phenyl ether (24-1). The resulting solution was then heated at 100 C. for 2 h. The reaction mixture was then cooled and poured onto crushed ice. The aqueous layer was extracted with CH2 Cl2 (x3). The combined organic extracts were dried (Na2 SO4) and concentrated. Column chromatography (95:5 Hexane/EtOAc) and trituration (hexane) of the pure fractions afforded 24-2 as a pink solid. 1 H NMR (CDCl3) delta 8.00 (d, J=7.8 Hz, 2H), 7.45 (m, 5H), 7.10 (d, J=7.8 Hz, 2H), 5.15 (s, 2H).

The synthetic route of 946-80-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Merck & Co., Inc.; US5872138; (1999); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

366-99-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 366-99-4 as follows.

To 124 (1.09 g, 3.5 mmol) dissolved in acetone (25 mL) was added 3-fluoro-p-anisidine (0.54 g, 3.5 mmol) in acetone (5 mL) followed by addition of 2.5 N NaOH (1.4 mL, 3.5 mmol) and water (3.5 mL). The reaction mixture was stirred and heated at reflux for 3 hours. The reaction mixture was extracted three times using dichloromethane; the combined organic layers were washed with brine and dried over potassium carbonate. The sample was filtered, concentrated in vacuo, and the resulting solid was dried overnight under vacuum to yield white solid (E15) (1.332 g, 97percent); mp 194¡ã C.; HPLC: Inertsil ODS 3V C18, 40:30:30 v:v:v [KH2PO4 (0.01 M, pH 3.2):CH3OH:CH3CN], 264 nm, Rt 33.2 min, 97.6percent purity; MS (TOF ES+) m/z 396 (35.0); 394 (M+H, 100).

According to the analysis of related databases, 366-99-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Timmer, Richard T.; Alexander, Christopher W.; Pillarisetti, Sivaram; Saxena, Uday; Yeleswarapu, Koteswar Rao; Pal, Manojit; Reddy, Jangalgar Tirupathy; Krishma Reddy, Velagala Venkata Rama Murali; Sesila Sridevi, Bhatlapenumarthy; Kumar, Potlapally Rajender; Reddy, Gaddam Om; US2004/209882; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

929-75-9, Adding a certain compound to certain chemical reactions, such as: 929-75-9, name is 1,11-Diamino-3,6,9-trioxaundecane, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 929-75-9.

General procedure: A two-neck flask equipped with a magnetic stirrer and a reflux condenser was filled with dry argon and then charged with diazacrown ether 3 or 4 (0.2 mmol), Pd(dba)2 (8-16 mol.%), the phosphine ligand BINAP (9-18 mol.%), and anhydrous dioxane (10 mL). After stirring for 2-3 min, an appropriate amine 5 (0.2 mmol) and ButONa (0.6 mmol) were added. The reaction mixture was refluxed for 24 h. After completion of the reaction, the precipitate that formed was filtered off and washed with CH2Cl2 (10 mL). The combined filtrates were concentrated in vacuo. The residue was dissolved in CH2Cl2 (5 mL) and washed with water (3¡Á10 mL). The organic layer was separated, and the aqueous layers were combined to extract organic matter with CH2Cl2 (3¡Á10 mL). The combined organic fractions were dried over 4 A molecular sieves and concentrated in vacuo. The residual thick dark oil was chromatographed on silica gel using the following sequence of eluents: CH2Cl2, CH2Cl2-MeOH (100 : 1)-(3 : 1), CH2Cl2-MeOH-NH3 (100 : 20 : 1)-(10 : 4 : 1).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,11-Diamino-3,6,9-trioxaundecane, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Chernichenko; Averin; Buryak; Beletskaya; Russian Chemical Bulletin; vol. 63; 9; (2014); p. 2056 – 2063; Izv. Akad. Nauk, Ser. Khim.; 9; (2014); p. 2056 – 2063,8;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

1535-73-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1535-73-5 name is 3-Trifluoromethoxyaniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a solution of 3-trifluoromethoxy aniline (0.5 g, 2.8 mmol) in CH2Cl2 (70 ml) is added dropwise, phenyl chloroformate (1.06 ml, 8.5 mmol) and pyridine (0.226 ml, 2.8 mmol) at 0 C. The reaction mixture is stirred at 0 C. for 30 min. The solution is washed with 0.1 N HCl, 5% NaHCO3, brine, and concentrated under vacuum. The resulting solid is crystallized from n-heptane to give white needles 0.6 g (71% yield). HRMS (EI) calcd for C14H10F3NO3 297.0613, found 297.0613. Example 405 (from 4-amino-3-methylphenol and phenyl 3-(trifluoromethoxy)phenylcarbamate) is prepared by following Method D, making non-critical modifications. The resulting residue is triturated with CH3CN to give an off white solid 0.07 g (33% yield). HRMS (ESI) calcd for C15H13N2O3F3+H 327.0956, found 327.0954.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Trifluoromethoxyaniline, and friends who are interested can also refer to it.

Reference:
Patent; Piotrowski, David W.; Rogers, Bruce N.; McWhorter JR., William W.; Walker, Daniel Patrick; Corbett, Jeffrey W.; Groppi JR., Vincent E.; Rudmann, Daniel G.; US2003/236287; (2003); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1484-26-0 as follows. 1484-26-0

A mixtureof triethyl orthoformate (92 mL, 0.55 mol) and 2,2-dimethyl- [1, 3] – dioxane-4,6-dione (75.3 g, 0.522 mol) (Meldrum’s acid) was heated at55 C for 90 minutes and then cooled to45 C. A solution of 3-benzyloxyaniline (100.2 g, 0.5029 mol) in methanol (200 mL) was slowly added to the reaction over a period 45 minutes while maintaining the reaction temperature below50 C. The reaction was then heated at45 C for one hour, allowed to cool to room temperature, and stirred overnight. The reaction mixture was cooled to 1 C, and the product was isolated by filtration and washed with cold ethanol (-400 mL) until the filtrate was colorless.5-{[(3- Benzyloxy) phenylimino]methyl}-2,2-dimethyl- [1, 3] -dioxane-4,6-dione (170.65 g) was isolated as a tan, powdery solid. ‘H NMR (300MHz, DMSO-d6) : 8 11.21 (d, J= 14.2 Hz, 1H), 8. 61 (d, J= 14.2 Hz, 1H), 7.49-7. 30 (m, 7H), 7.12 (dd, J= 8. 1,1. 96 Hz, 1H), 6.91 (dd, J= 8.4, 2.1 Hz, 1H), 5.16 (s, 2H), 1. 68 (s, 6H).

According to the analysis of related databases, 1484-26-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; 3M INNOVATIVE PROPERTIES COMPANY; WO2005/48933; (2005); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

A common heterocyclic compound, 437-82-1, name is 2,6-Difluoroanisole, molecular formula is C7H6F2O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 437-82-1.

Step 1. Preparation of 3,5-difluoro-4-methoxyacetophenone To a stirred suspension of AlCl3 (24.05 g, 180.40 mmol) in chloroform (300 mL, dried by passage through alumina) at 4 C. (ice bath) under nitrogen was added acetyl chloride (11.0 mL, 152.65 mmol) over 20 minutes. This chilled suspension was stirred at 0 C. for 30 minutes and 2,6-difluoro anisole was added dropwise over 30 minutes. The resulting suspension was warmed to room temperature and stirred overnight. The reaction was quenched by slowly pouring it into a rapidly stirred ice/water mixture. The water layer was extracted with methylene chloride (2*50 mL) and the organic phases were combined and concentrated in vacuo yielding a clear mobile oil. In a 50 mL round bottomed flask was added the above clear oil, DMF (25 mL), K2 CO3 (15 g). Methyl iodide (6 mL) was added and the suspension stirred at 45 C. under nitrogen overnight. water (1 mL) was added and the mixture was heated for an additional 14 hours. The crude reaction mixture was cooled to room temperature, diluted with water (250 mL) and extracted with diethyl ether (3*100 mL). The ether phase was washed with sodium bicarbonate saturated solution, potassium bisulfate (0.1N solution), dried over MgSO4, filtered and concentrated in vacuo yielding a clear mobile liquid. This liquid was distilled (30 C., 1 mm) yielding 12.5 g of a clear liquid which was a mixture of 3,5-difluoro-4-methoxyacetophenone and 3,5-difluoro-4-acetoxyacetophenone in an 85:15 ratio.

The synthetic route of 2,6-Difluoroanisole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; G.D. Searle & Co.; US5756529; (1998); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem