Category: 7664-66-6

Synthetic Route of 7664-66-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7664-66-6, name is 4-Isopropoxyaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

[Example 45] Preparation of 1-(4-chlorobenzyl)-2-(4-isopropoxyphenylimino)-dihydro-pyrimidine-4,6-dion (I-322) To a mixture of 4-isopropoxyaniline (15 g, 99 mmol) and acetonitrile (150 mL) was added gradually benzoylisothiocyanate (13.4 mL, 99 mmol) under ice-cooling, and the resulting mixture was stirred at room temperature for 50 minutes. To the reaction mixture were added gradually 4-chlorobenzylamine (12.1 mL, 99 mmol), triethylamine (13.8 mL, 99 mmol), and 1-ethyl-3-(3-dimethyl-aminopropyl) carbodiimide hydrochloride (20.9 g, 109 mmol) under ice-cooling, and the resulting mixture was stirred at room temperature for 2.5 hours. To the reaction mixture was added water (200 mL), and the mixture was extracted with toluene (300 mL). The extract was washed by brine (100 mL), dried over anhydrous magnesium sulfate, and concentrated in vacuo. The resulting residue was precipitated by toluene and hexane to give N-((4-chlorobenzylamino)(4-isopropoxyanilino)methylene)benzamide (38.1 g, Yield: 91%) as white powder. 1H-NMR (delta ppm TMS/CDCl3): 1.34 (6H, d, J=6.0 Hz), 4.52 (1H, sept, J=6.0 Hz), 4.72 (2H, d, J=6.2 Hz), 5.09 (1H, brs), 6.87-6.92 (2H, m), 7.13-7.18 (2H, m), 7.24-7.31 (4H, m), 7.36-7.48 (3H, m), 8.21-8.25 (2H, m), 11.9 (1H, brs).

The synthetic route of 4-Isopropoxyaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shionogi & Co., Ltd.; KAI, Hiroyuki; ENDOH, Takeshi; JIKIHARA, Sae; ASAHI, Kentaro; HORIGUCHI, Tohru; EP2604260; (2013); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

7664-66-6, name is 4-Isopropoxyaniline, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C9H13NO

To a solution of 4-isopropoxyaniline (9.06 g, 60.0 mmol) in CH2Cl2 (120 mL) and pyridine (30 mL) was added 4-nitrophenyl chloroformate (10.9 g, 54.0 mmol) portionwise with stirring over ~1 min with brief ice-bath cooling. After stirring at room temperature for 1 h, the homogeneous solution was diluted with CH2Cl2 (300 mL) and washed with 0.6 M HCl (1*750 mL) and 0.025 M HCl (1*1 L). The organic layer was dried (Na2SO4) and concentrated to give the title compound as a light violet-white solid (16.64 g, 98%). 1H NMR (CDCl3) delta 8.31-8.25 (m, 2H), 7.42-7.32 (m, 4H), 7.25-7.20 (m, 2H), 6.93 (br s, 1H), 2.90 (sep, J=6.9 Hz, 1H), 1.24 (d, J=6.9 Hz, 6H). LC/MS (ESI) calcd for C16H17N2O5 (MH)+ 317.1, found 633.2 (2 MH)+.

The synthetic route of 7664-66-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Baumann, Christian Andrew; Gaul, Michael David; US2006/281700; (2006); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7664-66-6, name is 4-Isopropoxyaniline, A new synthetic method of this compound is introduced below., Recommanded Product: 4-Isopropoxyaniline

A mixture of 4-bromo-2-fluoro-l-nitrobenzene (0.39, 1.36 mmol), 4-(propan-2-yloxy)aniline (0.229,1 .43 mmol) and K2C03 (0.38 g, 2.73 mmol) in DMF (3 mL) was stirred at 90 C for 5h. Then thereaction mixture was diluted with EtOAc and washed with 5% aq. LiCI solution. The organic phasewas dried over Na2504, filtered, and concentrated in vacuo. The residue was purified by SiC2 columnchromatography (hexanes I EtOAc from 30:1 to 20:1) to give 0.43g (90%) of the product as orangesolid.1H NMR (500 MHz, CDCI3) O 9.37 (5, 1H), 8.04 (d, 1H), 7.12-7.17 (m, 3H), 6.93-6.97 (m, 2H), 6.81 (dd, 1H), 4.56 (sep, 1H), 1.36 (d, 6H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ARISAN THERAPEUTICS INC.; PLEWE, Michael; BROWN, Eric; GANTLA, Vidyasagar; HENKEL, Gregory; MCCORMACK, Kenneth; SOKOLOVA, Nadzeda V.; SHIN, Young-Jun; (147 pag.)WO2018/13430; (2018); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7664-66-6, name is 4-Isopropoxyaniline, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C9H13NO

General procedure: N,N’-di(2-fluorophenyl)-4-methoxyl-isophthalamide(1a): Equipped a stirrer in a three-necked flask (100 ml), to a mixture of 2-fluoroaniline (1.11 g, 10.0 mmol),anhydrous tetrahydrofuran (15 ml) and dry pyridine (1 ml), dropwise added 4-methoxyl-isophthaloyl dichloride (1.17 g, 5.0 mmol) which had been dissolved in dry tetrahydrofuran (10 ml). After the mixture reaction at room temperature for 8 h under continuous stirring, the excess tetrahydrofuran was distilled off in vacuum. The residue was recrystallized by acetone. Its melting point is 204-206 C, and yield is 67%. The other compounds 1b-1j, 2a-2k, 3a-3l and 4a-4h were prepared in the same manner.

According to the analysis of related databases, 7664-66-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Liu, Xiu Jie; Shi, Xin Xin; Zhong, Yong Liang; Liu, Ning; Liu, Kai; Bioorganic and medicinal chemistry letters; vol. 22; 21; (2012); p. 6591 – 6595,5;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7664-66-6, name is 4-Isopropoxyaniline, A new synthetic method of this compound is introduced below., HPLC of Formula: C9H13NO

General procedure: 2-Hydroxynaphthalene-1-carboxylic acid or 1-hydroxynaphthalene-2-carboxylic acid (5.30 mmol) and appropriate alkoxyaniline (5.30 mmol) were suspended in 30 mL of dry chlorobenzene. Phosphorous trichloride (2.65 mmol) was added dropwise, and reacting mixture was heated in the microwave reactor for 15 min at 130 C using infrared flask-surface control of temperature. Solvent was evaporated in vacuum; residue solid was washed with 2M HCl and crystallized from aqueous ethanol. If necessary, column chromatography was used for further purification (mobile phase DCM:MeOH 19:1).

The synthetic route of 7664-66-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Gonec, Tomas; Pospisilova, Sarka; Kauerova, Tereza; Kos, Jiri; Dohanosova, Jana; Oravec, Michal; Kollar, Peter; Coffey, Aidan; Liptaj, Tibor; Cizek, Alois; Jampilek, Josef; Molecules; vol. 21; 8; (2016);,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 7664-66-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7664-66-6, name is 4-Isopropoxyaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Example 54: Preparation of 2-[l-(4-fluorophenyl)-3-[2-(4-methoxyphenyl)ethyl]-5- oxo-2-sulfanylideneimidazolidin-4-yl]-N-[4-(propan-2-yloxy)phenyl]acetamide. – EDCI (143 mg; 0.74 mmol; 1.5 eq), followed by HOBt (113 mg; 0.74 mmol; 1.5 eq), DIPEA (256 muU 1-49 mmol; 3 eq) and 4-(propan-2-yloxy)aniline (150 mg; 0.99 mmol; 2 eq) were added to a solution of 2-[l-(4-fluorophenyl)-3-[2-(4- methoxyphenyl)ethyl] -5-oxo-2-sulfanylideneimidazolidin-4-yl] acetic acid (1-21 ) (200 mg; 0.50 mmol; 1 eq) in anhydrous dioxane (8 mL). The reaction mixture was stirred at room temperature for 18 hours. Saturated ammonium chloride (20 mL) was added and the aqueous layer was extracted with ethyl acetate (3 x 25 mL). The combined organic layers were washed with saturated sodium chloride (3 x 20 mL), dried over sodium sulfate, filtered and concentrated to dryness. The crude was purified on silica gel using dichloromethane/ethyl acetate (95/5) as an eluent. After trituration in diethyl ether/ethanol, the title compound 2-[l-(4-fluorophenyl)-3-[2-(4- methoxyphenyl)ethyl]-5-oxo-2-sulfanylideneimidazolidin-4-yl]-N-[4-(propan-2- yloxy)phenyl]acetamide was obtained with 43% yield (114 mg) as a white solid. 1H- NMR (Acetone-d6): delta (ppm), 1.26 (d, 6H), 2.94 (m, 1H), 3.15 (m, 2H), 3.36 (m, 1H), 3.74 (s, 3H), 3.78 (m, 1H), 4.31 (m, 1H), 4.59 (m, 2H), 6.86 (d, 4H) , 7.25 (m, 4H), 7.48 (m, 4H), 9.32 (s, 1H); MS (ESI+): m/z = 535.9 [M+H]+ .

The synthetic route of 4-Isopropoxyaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; VIVALIS; GUEDAT, Philippe; BERECIBAR, Amaya; CIAPETTI, Paola; VENKATA PITHANI, Subhash; TROUCHE, Nathalie; WO2013/171281; (2013); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7664-66-6, name is 4-Isopropoxyaniline, A new synthetic method of this compound is introduced below., Product Details of 7664-66-6

To a solution of 4-isopropoxyaniline (9.06 g, 60.0 mmol) in CH2Cl2 (120 mL) and pyridine (30 mL) was added 4-nitrophenyl chloroformate (10.9 g, 54.0 mmol) portionwise with stirring over 1 min with brief ice-bath cooling. After stirring at room temperature for 1 h, the homogeneous solution was diluted with CH2Cl2 (300 mL) and washed with 0.6 M HCl (1*750 mL) and 0.025 M HCl (1*1 L). The organic layer was dried (Na2SO4) and concentrated to give the title compound as a light violet-white solid (16.64 g, 98%). 1H NMR (CDCl3) delta 8.31-8.25 (m, 2H), 7.42-7.32 (m, 4H), 7.25-7.20 (m, 2H), 6.93 (br s, 1H), 2.90 (sep, J=6.9 Hz, 1H), 1.24 (d, J=6.9 Hz, 6H). LC/MS (ESI) calcd for C16H17N2O5 (MH)+ 317.1, found 633.2 (2 MH)+.

The synthetic route of 7664-66-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Baumann, Christian Andrew; Gaul, Michael David; US2006/281755; (2006); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 7664-66-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7664-66-6, name is 4-Isopropoxyaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

The compound obtained in Step 3 (60 mg) was dissolved in acetonitrile (1.5 mL), 4-isopropoxy aniline (40 mg) was added and stirred for 30 minutes under microwave irradiation under 180 C. It extracted three times with chloroform. After addition of a saturated aqueous sodium hydrogen carbonate solution to the reaction solution. Then, the organic layer was concentrated and dried over sodium sulfate. The resulting residue to give the title compound purified by silica gel column chromatography (82mg, 100%).

The synthetic route of 4-Isopropoxyaniline has been constantly updated, and we look forward to future research findings.

Electric Literature of 7664-66-6, A common heterocyclic compound, 7664-66-6, name is 4-Isopropoxyaniline, molecular formula is C9H13NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4-Isopropoxy-phenylamine (11.3 g) was added to a solution of 4-hydroxy-l-(2-methoxy- ethyl)-cyclohexanecarboxylic acid ethyl ester (11.5 g) in toluene (361 ml). The mixture was stirred for 10 minutes at RT. Then, dimethylaluminiumchloride (0.9 M in hexane, 99 ml) was added dropwise and the reaction mixture was heated to reflux for 4 h. The mixture was then cooled to 0C, water (50 ml) was added dropwise then AcOEt (300 ml). The mixture was stirred further 30 minutes, more AcOEt was added, the layers were then separated, the organic layer was dried over MgS04, filtered and the solvent was evaporated off . The crude product was triturated with diethyl ether/heptane to give the title compound as a mixture of cis/trans isomers as brown solid (14.3 g) which was used directly in the next step. MS (m/e): 304.190 [MH+].

The synthetic route of 7664-66-6 has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7664-66-6, name is 4-Isopropoxyaniline, A new synthetic method of this compound is introduced below., category: ethers-buliding-blocks

[Example 1] Preparation of 1-(4-chlorobenzyl)-3-ethylamino-6-(4-isopropoxyphenylamino)benzene (I-071) To a mixture of 3-bromo-4-fluoro-1-nitrobenzene (1.0 g, 4.6 mmol) and DMSO (5 mL) were added potassium carbonate (1.01 mg, 7.3 mmol) and 4-isopropoxyaniline (1.03 g, 6.8 mmol), and the resulting mixture was stirred at 100C for 0.5 hours. To the reaction mixture was added water (20 mL), and the resulting mixture was extracted with ethyl acetate (30 mL*2). The extract was washed by brine (20 mL) and water, and the organic layer was dried over anhydrous sodium sulphate, and concentrated in vacuo. The resulting residue was purified by silica gel column chromatography (ethyl acetate/hexane). The resulting residue was precipitated by ethyl acetate and hexane to give 3-bromo-4-(4-isopropoxyphenylamino)-1-nitrobenzene (0.55 g, Yield: 35%)as orange solid. 1H-NMR (delta ppm TMS/DMSO-d6): 1.28 (6H, d, J = 6.0 Hz), 4.61 (1H, sept, J= 6.0 Hz), 6.76 (1H, d, J = 9.0 Hz), 6.97 (2H, d, J = 9.0 Hz), 7.19 (2H, d, J = 9.0 Hz), 8.00 (1H, dd, J = 8.9 Hz, 2.4 Hz), 8.34 (2H, d, J = 2.4 Hz).

The synthetic route of 7664-66-6 has been constantly updated, and we look forward to future research findings.