Category: 4393-09-3

Application of 4393-09-3, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 4393-09-3 name is (2,3-Dimethoxyphenyl)methanamine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To the mixture of 5-nitro-furan-2-carbonyl chloride (877 mg, 5 MMOL) in CH2CI2 (10 ml) was added to 2,3-dimethoxy benzyl amine (0.734 ML, 5 MMOL) in Et3N (3 ML) and reaction was stirred for 14 hr. at room temperature. The reaction was followed as explained in method 2 to yield 830 mg (54%) of compound 53. Rf 0. 48 (1: 1 hexane: ethyl ACETATE). 1HNMR (500 MHz, CDCIS) : E53. 90 (3H, s), 3.95 (3H, s) 4.65 (2H, d, J = 6. 10 Hz), 6.92 (2H, dd, J = 1. 46,7. 05 HZ), 6.95 (1 H, dd, J = 1.46, 7. 81 Hz), 7.03-7. 09 (3H, m) ; 13CNMR (300 MHz, CDC13) : 38.91, 55.21, 60.19, 111. 88, 115.27, 120. 84, 123.63, 130.04, 146.76, 147.66, 152.11, 155.54 ; EL-MASS : 329 (M++23), 305 (M+-1) ; IR : 1671,3323 cm-1.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (2,3-Dimethoxyphenyl)methanamine, and friends who are interested can also refer to it.

Reference:
Patent; THE UNIVERSITY OF TENNESSEE RESEARCH FOUNDATION; COLORADO STATE UNIVERSITY RESEARCH FOUNDATION; WO2005/7625; (2005); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4393-09-3, name is (2,3-Dimethoxyphenyl)methanamine, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C9H13NO2

Step 1 Preparation of 5-Bromo-N-(2,3-dimethoxybenzyl)-8-hydroxy-1,6-naphthyridine-7-carboxamide Into a round bottom flask fitted with a gas inlet, condenser and a magnetic stirring bar was placed methyl 8-(benzoyloxy)-5-bromo-1,6-naphthyridine-7-carboxylate (0.4 g, 1.03 mmol), 2,3-dimethoxybenzylamine (0.432 g, 0.38 mL, 2.58 mmol) and 10 mL toluene. This mixture was refluxed for 18 hours, after which the reaction was cooled and the solvent removed in vacuo. The resulting residue was triturated with diethyl ether and filtered to yield 5-bromo-N-(2,3-dimethoxybenzyl)-8-hydroxy-1,6-naphthyridine-7-carboxamide as a light yellow solid. 1H NMR (CDCl3, 400 MHz) delta 9.18 (1H, dd, J=1.6 Hz, 4.2 Hz); 8.53 (1H, dd, J=1.6 Hz, 8.5 Hz); 8.26 (1H, m); 7.72 (1H, dd, J=4.2 Hz, 8.5 Hz); 6.84-7.04 (3H, m); 4.72 (2H, d, J=6.2 Hz); 3.97 (3H, s); 3.89 (3H, s).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4393-09-3.

Reference:
Patent; Anthony, Neville J.; Gomez, Robert P.; Young, Steven D.; Egbertson, Melissa; Wai, John S.; Zhuang, Linghang; Embrey, Mark; Tran, LeKhanh; Melamed, Jeffrey Y.; Langford, H. Marie; Guare, James P.; Fisher, Thorsten E.; Jolly, Samson M.; Kuo, Michelle S.; Perlow, Debra S.; Bennett, Jennifer J.; Funk, Timothy W.; US2003/55071; (2003); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 4393-09-3, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4393-09-3, name is (2,3-Dimethoxyphenyl)methanamine, This compound has unique chemical properties. The synthetic route is as follows.

Step 4: 1-Benzyl-N-(2,3-dimethoxybenzyl)-3-hydroxy-2-oxo-1,2-dihydropyridine-4-carboxamide (J4) The methyl ester J3 (1 equivalent) was heated at 100 C. in 2,3-dimethoxybenzylamine (35 equivalents) overnight. The reaction was cooled, diluted with water and extracted with DCM. The organic phase was dried, concentrated and the residue purified by reverse phase chromatography twice to give the desired amide J4. 1H NMR (CDCl3, 400 MHz,) delta 8.1 (1H, br. s), 7.3 (3H, m), 7.25 (2H, m), 7.0 (2H, m), 6.95 (1H, m), 6.83 (3H, m), 5.14 (2H, s), 4.64 (2H, d, J=5.6 Hz), 3.88 (3H, s), 3.84 (3H, s).

The chemical industry reduces the impact on the environment during synthesis (2,3-Dimethoxyphenyl)methanamine. I believe this compound will play a more active role in future production and life.

Reference:
Patent; ISTITUTO DI RICERCHE DI BIOLOGIA MOLECOLARE P, ANGELETTI S.P.A.; MERCK & CO., INC.; US2007/155744; (2007); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 4393-09-3,Some common heterocyclic compound, 4393-09-3, name is (2,3-Dimethoxyphenyl)methanamine, molecular formula is C9H13NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 74 The procedure described in Example 28 was repeated using N-(2,3-dimethoxybenzyl)-2-nitrobenzamide (obtained as a solid, m.p. 128-129 C., by reaction of 2-nitrobenzoyl chloride with 2,3-dimethoxybenzylamine) as starting material but with a reaction duration of 18 hours and using a mixture of ethanol and water (13/1 v/v) as the solvent. There was thus obtained 1,2-dihydro-2-(2,3-dimethoxybenzyl)-3H-indazol-3-one as a solid, m.p. 78-79 C. (recrystallized from aqueous ethanol), in 47% yield.

The synthetic route of 4393-09-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ICI Pharma; Imperial Chemical Industries PLC; US5173496; (1992); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 4393-09-3, name is (2,3-Dimethoxyphenyl)methanamine, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4393-09-3, Safety of (2,3-Dimethoxyphenyl)methanamine

In a 20 mL scintillation vial, 4-amino-5-cyano-6-ethoxy-pyrindine-2-carboxylic acid (19 mg, 0.09 mmol) was dissolved in DMA (0.7 mL). Then TBTU (30 mg, 0.09 mmol) dissolved in DMA (0.7 mL) was added, followed by the addition of 2,3-dimethoxylbenzylamine (17 mg, 0.11 mmol, 1.2 eq.) in DMA (0.6 mL). Then TEA (9.37 mg, 0.09 mmol) dissolved in DMA (0.7 mL) was added. The mixture was shaken at room temperature for 24 hours. The crude mixture was purified using reverse phase HPLC (TFA). 1H NMR (500 MHz, DMSO-D6/D2O) delta ppm 1.28 (t, 3H) 3.80 (d, 6H) 4.26-4.66 (m, 4H) 6.67-7.19 (m, 4H) 8.87 (t, 1H). MS (ESI) positive ion 357 (M+H)+; negative ion 355(M-H)-.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (2,3-Dimethoxyphenyl)methanamine, and friends who are interested can also refer to it.

Reference:
Patent; Liu, Gang; Sham, Hing L.; Szczepankiewicz, Bruce G.; Xin, Zhili; Zhao, Hongyu; Serby, Michael D.; Liu, Bo; Liu, Mei; US2006/173050; (2006); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 4393-09-3, name is (2,3-Dimethoxyphenyl)methanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: (2,3-Dimethoxyphenyl)methanamine

Step A. tert-Butyl 4-[(1-{[(2,3-dimethoxybenzyl)amino]carbonyl}-4-piperidinyl)amino]phenethylcarbamate The title compound (0.32 g, 0.64 mmol) was prepared from 2,3-dimethoxy benzyl amine (0.668 g, 4.0 mmol) and {2-[4-(piperidin-4-ylamino)-phenyl]-ethyl}-carbamic acid tert-butyl ester (1.276 g, 4.0 mmol) according to Procedure C.

The synthetic route of (2,3-Dimethoxyphenyl)methanamine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; American Home Products Corporation; US2002/28832; (2002); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

4393-09-3, name is (2,3-Dimethoxyphenyl)methanamine, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: ethers-buliding-blocks

To a solution of 2, 3-dimethoxybenzylamine (2.2 mL, 15.0 mmol) in 2-butanone (20 mL) was added 1,3-propane sultone (1.97 g, 15.8 mmol). The mixture was stirred at reflux for 2 hours. The reaction mixture was cooled to room temperature. The solid was collected by filtration, washed with acetone (2 x 25 mL) and dried in vacuo. The crude product was suspended in 90% Acetone/MeOH (75 mL). The suspension was stirred at reflux for 30 seconds, the solid was collected by filtration, and dried in vacuo ; affording compound AZ, 1.95 g (45%).

The synthetic route of 4393-09-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NEUROCHEM (INTERNATIONAL) LIMITED; WO2004/113275; (2004); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 4393-09-3, name is (2,3-Dimethoxyphenyl)methanamine, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4393-09-3, Computed Properties of C9H13NO2

Step 4 Preparation of 5-cyano-N-(2,3-dimethoxybenzyl)-8-hydroxy-1,6-naphthyridine-7-carboxamide To a solution of methyl 8-(benzoyloxy)-5-cyano-1,6-naphthyridine-7-carboxylate (264 mg, 0.792 mmol) in anhydrous toluene (12 ml) was added 2,3-dimethoxybenzyl amine (132 mg, 0.79 mmol) and the solution was stirred at reflux under argon overnight. The solvent was removed under reduced pressure to give a brown syrup which was subsequently taken up into ether (10 ml). After stirring for 4 hours the solids were collected by vacuum filtration and dried overnight on an aberhalden to give an off white solid. 1H NMR (CDCl3, 400 MHz) delta 9.26 (1H, d, J=2.8 Hz), 8.59-8.56 (1H, d, J=8.5 Hz), 8.39 (1H, b), 7.82-7.79 (1H, dd, J=4.2 and 8.5 Hz), 7.07 (1H, t, J=7.9 Hz), 6.98 (1H, d, J=6.6 Hz), 6.93 (1H, d, J=8.2 Hz), 4.72 (2H, d, J=6.0 Hz), 3.97 (3H, s) and 3.89(3H, s) ppm.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (2,3-Dimethoxyphenyl)methanamine, and friends who are interested can also refer to it.

Reference:
Patent; Anthony, Neville J.; Gomez, Robert P.; Young, Steven D.; Egbertson, Melissa; Wai, John S.; Zhuang, Linghang; Embrey, Mark; Tran, LeKhanh; Melamed, Jeffrey Y.; Langford, H. Marie; Guare, James P.; Fisher, Thorsten E.; Jolly, Samson M.; Kuo, Michelle S.; Perlow, Debra S.; Bennett, Jennifer J.; Funk, Timothy W.; US2003/55071; (2003); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 4393-09-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4393-09-3, name is (2,3-Dimethoxyphenyl)methanamine belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A solution of EXAMPLE 7A (175 mg) in acetonitrile (4 mL) at 25 C. was treated with 2,3-dimethoxybenzylamine (85 mg) and N,N-diisopropylethylamine (450 muL), heated in a microwave reactor for 10 min at 50 C., and 20 min at 195 C., cooled, treated with tert-butyl (1S,4S)-(-)-2,5-diaza-bicyclo(2.2.1)heptane-2-carboxylate (119 mg), heated in a microwave reactor for 20 min at 195 C., cooled, treated with water, acidified to pH 3 with aqueous HCl, and extracted with ethyl acetate. The extract was washed with water, and concentrated. A solution of the concentrate in ethanol (4 mL) at 25 C. was treated with LiOH (0.1M, 5 mL), stirred for 18 hours, treated with water, acidified to pH 1 with aqueous HCl, and filtered.

The synthetic route of (2,3-Dimethoxyphenyl)methanamine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Anderson, David; Beutel, Bruce; Bosse, Todd D.; Clark, Richard; Cooper, Curt; Dandliker, Peter; David, Caroline; Gu, Yu-Gui; Hansen, Todd Matthew; Hinman, Mira; Kalvin, Douglas; Larson, Daniel P.; Lynch, Linda; Ma, Zhenkun; Motter, Christopher; Palazzo, Fabio; Rosenberg, Teresa; Rehm, Tamara; Sanders, William; Tufano, Michael; Wagner, Rolf; Weitzberg, Moshe; Yong, Hong; Zhang, Tianyuan; US2003/232818; (2003); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 4393-09-3, name is (2,3-Dimethoxyphenyl)methanamine, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4393-09-3, name: (2,3-Dimethoxyphenyl)methanamine

General procedure: Under an atmosphere of N2, the appropriate amine (0.669 mmol, 1.2 equiv.) was dissolved in 1,2-dichloroethane (DCE) (1 mL) and methyl-(E)-3-(4-formylphenyl)acrylate (106 mg; 0.557 mmol, 1 equiv.) wasthen added, followed by the addition of acetic acid (64 muL, 1.11 mmol, 2 equiv.). The reaction mixture wasstirred overnight at room temperature. When the starting aldehyde had been consumed as monitored by TLC,NaBH(OAc)3 (0.836 mmol, 1.5 equiv.) was added, and the reaction mixture was stirred for 3 h at roomtemperature. The reaction was quenched by the addition of saturated NH4Cl solution (2.0 mL), and thenextracted with saturated sodium hydrogen carbonate solution (10 mL) and ethyl acetate (3 × 10 mL). Theorganic layer was washed with brine, dried over anhydrous magnesium sulfate, and filtered. The solvent wasremoved in vacuo, and the residue was dissolved in a minimal volume of dichloromethane (DCM) and purifiedby flash column chromatography (silica gel, 20-80% EtOAC:hexane).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Daniel, Lydia; Gotsbacher, Michael P.; Richardson-Sanchez, Tomas; Tieu, William; Codd, Rachel; Bioorganic and Medicinal Chemistry Letters; vol. 29; 18; (2019); p. 2581 – 2586;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem