Category: 20781-20-8

Electric Literature of 20781-20-8, A common heterocyclic compound, 20781-20-8, name is (2,4-Dimethoxyphenyl)methanamine, molecular formula is C9H13NO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: The 6-chloronicotinic acid (2g, 12.73 mmol) was dissolved inDMF (20 ml). In the prepared solution, TBTU (4.90 g, 15.28 mmol)and TEA (2.66 mL, 19.10 mmol) was added. The reaction mixture was stirred for 30 min at room temperature. An amine(12.73 mmol) was added and stirred for 3 h at room temperature.The progress of the reaction was monitored by TLC. The reactionmixture was then quenched with crushed ice (50g) and stirred for30 min. The obtained precipitate was filtered and dried. Finally the product was purified by column chromatography using ethyl acetate:petroleum ether as eluent. Yield: (2a:87%, 2c:86%, 2l: 88%).

The synthetic route of 20781-20-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Thirunavukarasu, Jayaprakash; Begam, Rosina; Shajahan; Journal of Molecular Structure; vol. 1196; (2019); p. 518 – 526;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 20781-20-8, name is (2,4-Dimethoxyphenyl)methanamine, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 20781-20-8, category: ethers-buliding-blocks

To a solution of compound 58 (6.6 g, 33.5 mmol) in dichloromethane (100 mL) were added DIPEA (8.65 g, 67 mmol), HOBt (5.4 g, 36.85 mmol) and EDCI (9.6 g, 50.3 mmol). After about 15 min stirring, to the homogeneous reaction mixture was added a solution of 2,4-dimethoxybenzyl amine (5.6 g, 33.5 mmol) in dichloromethane (50 mL) dropwise under nitrogen atmosphere. The resulting mixture was stirred under nitrogen atmosphere at room temperature for l6h. The reaction mixture was washed successively with 1N NaOH (100 mL), water (100 mL) and brine (100 mL). The organic phase was then dried over Na2S04 and evaporated to give a crude solid product 59 that crystallized from ethyl ether. Filtration and open air suction drying afforded an off-white solid pure product 9.8g (96%), (MS: [M+l] = 347).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; AGENEBIO, INC.; MEKONNEN, Belew; BUTERA, John, A.; HUANG, Jianxing; PATEL, Hemantbhai; JIANG, Qin; HERR, Robert, Jason; MAYHEW, Nicholas, James; FREEMAN, Emily, Elizabeth; (682 pag.)WO2019/246300; (2019); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 20781-20-8, name is (2,4-Dimethoxyphenyl)methanamine, A new synthetic method of this compound is introduced below., Safety of (2,4-Dimethoxyphenyl)methanamine

1-(2,4-Dimethoxyphenyl)methanamine (23 g, 140 mmol) was added to a solution of C6 (20 g, 91 mmol) in methanol (275 mL). The reaction mixture was stirred at room temperature (20 C) for 24 hours, whereupon it was cooled to -78 C and treated in a drop-wise manner with lithium borohydride (2 M solution in tetrahydrofuran; 46.0 mL 92.0 mmol). The reaction mixture was allowed to slowly warm to room temperature, andwas then stirred at room temperature overnight. This was combined with a similar reaction mixture that employed C6 (16.18 g, 73.5 mmol) and concentrated in vacuo. The residue was mixed with saturated aqueous sodium bicarbonate solution (300 mL) and water (200 mL), and extracted with ethyl acetate (4 x 200 mL). The combined organic layers were dried over sodium sulfate, filtered, concentrated under reducedpressure, and purified via chromatography on silica gel (Gradient: 0% to 9% methanolin dichloromethane) to provide the product as a light yellow oil. Combined yield: 52.0 g,140 mmol, 85%. LCMS m/z 371.9 [M+H]. 1H NMR (400 MHz, CDCI3) 7.38-7.25 (m,5H), 7.12 (d, J=8.0 Hz, 1H), 6.46 (d, half of AB quartet, J=2.5 Hz, 1H), 6.43 (dd, half ofABX pattern, J=8.O, 2.5 Hz, 1 H), 4.58 (AB quartet, JAB= 12.0 Hz, IIVAB=23.2 Hz, 2H),4.07 (ddd, J=1 1.5, 4.5, 1.5 Hz, 1 H), 3.81 (5, 3H), 3.80 (5, 3H), 3.75 (5, 2H), 3.59-3.39(m, 4H), 2.75-2.65 (m, 1H), 1.91-1.80 (m, 2H), 1.48-1.35 (m, 1H), 1.23-1.12 (m, 1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; PFIZER INC.; BRODNEY, Michael Aaron; CHAPPIE, Thomas Allen; CHEN, Jinshan Michael; COE, Jotham Wadsworth; COFFMAN, Karen Jean; GALATSIS, Paul; GARNSEY, Michelle Renee; HELAL, Christopher John; HENDERSON, Jaclyn Louise; KORMOS, Bethany Lyn; KURUMBAIL, Ravi G.; MARTINEZ-ALSINA, Luis Angel; PETTERSSON, Martin Youngjin; REESE, Matthew Richard; ROSE, Colin Richard; STEPAN, Antonia Friederike; VERHOEST, Patrick Robert; WAGER, Travis T.; WARMUS, Joseph Scott; ZHANG, Yuan; (193 pag.)WO2018/163066; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 20781-20-8, name is (2,4-Dimethoxyphenyl)methanamine, A new synthetic method of this compound is introduced below., Application In Synthesis of (2,4-Dimethoxyphenyl)methanamine

Step 1: N-(2,4-dimethoxybenzyl)-4-iodo-5-methylpyridin-2-amine A solution of 2-fluoro-4-iodo-5-methylpyridine (85 g, 340 mmol) in 1-(2,4-dimethoxyphenyl)methanamine (270 mL, 1.68 mol) was allowed to stir at 110 C. overnight. The reaction mixture was allowed to cool to rt and diluted with EtOAc. A precipitate formed and was filtered and then washed with EtOAc. The solid was purified further by column chromatography to give N-(2,4-dimethoxybenzyl)-4-iodo-5-methylpyridin-2-amine (138 g, 50%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; MILLENNIUM PHARMACEUTICALS, INC.; Chau, Ryan W.; Cullis, Courtney A.; Duffey, Matthew O.; Gipson, Krista E.; Hu, Yongbo; Li, Gang; Sintchak, Michael D.; Vos, Tricia J.; US2013/165464; (2013); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 20781-20-8, name is (2,4-Dimethoxyphenyl)methanamine, This compound has unique chemical properties. The synthetic route is as follows., Formula: C9H13NO2

41. Reaction of but-3-en-1-ol and (benzyloxy)acetaldehyde in the presence of sulfuric acid provided 2-[(benzyloxy)methyl]tetrahydro-2H-pyran-4-ol, which was oxidized with pyridinium chlorochromate to afford 2-[(benzyloxy)methyl]tetrahydro-4H-pyran-4-one. Subsequent reductive amination with 1-(2,4-dimethoxyphenyl)methanamine and lithium borohydride gave cis-2-[(benzyloxy)methyl]-N-(2,4-dimethoxybenzyl)tetrahydro-2H-pyran-4-amine. This was reacted with C13 and triethylamine, and the product was deprotected using trifluoroacetic acid to yield N-{cis-2-[(benzyloxy)methyl]tetrahydro-2H-pyran-4-yl}-6-chloro-3-nitroquinolin-4-am ine; hydrogenation of the nitro group over platinum(IV) oxide afforded N4-{cis-2-[(benzyloxy)methyl]tetrahydro-2H-pyran-4-yl}-6-chloroquinoline-3,4-diamine.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 20781-20-8.

Reference:
Patent; Pfizer Inc.; Galatsis, Paul; Henderson, Jaclyn Louise; Kormos, Bethany Lyn; Kurumbail, Ravi G.; Reese, Matthew Richard; Stepan, Antonia Friederike; Verhoest, Patrick Robert; Wager, Travis T.; Pettersson, Martin Youngjin; Garnsey, Michelle Renee; (150 pag.)US2017/73343; (2017); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 20781-20-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 20781-20-8, name is (2,4-Dimethoxyphenyl)methanamine belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 2,4-dimethoxybenzylamine (6.6 mL, 43.5 mmol) in DCM (85 mL) was added saturated aqueous sodium bicarbonate solution (85 mL) and the mixture was stirred vigorously at RT for 15 min. Stirring was stopped then thiophosgene (6.6 mL, 87 mmol) was added via syringe to the bottom layer. The mixture was stirred at RT for 90 min then the aqueous layer was separated and the organic layer was washed with brine, dried over Na2SC>4 and concentrated in vacuo twice from DCM to give 9.1 g of l-(isothiocyanatomethyl)-2,4-dimethoxybenzene as yellow oil.

The synthetic route of (2,4-Dimethoxyphenyl)methanamine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MCKITTRICK, Brian; CALDWELL, John, P.; MCCAULEY, John, A.; VACCARO, Henry; CHAN, Tin-Yau; KIM, Hyunjin; SMITH, Elizabeth; HONG, Liwu; KHAN, Tanweer; YING, Shihong; WANG, Hongwu; (66 pag.)WO2018/118827; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 20781-20-8,Some common heterocyclic compound, 20781-20-8, name is (2,4-Dimethoxyphenyl)methanamine, molecular formula is C9H13NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 6 12,13-(2-methoxycarbonyl-but-2-en-1,4-yl)-12,13-dihydro-5,7-dioxo-6H-indolo[2,3-a]pyrrolo[3,4-c]carbazole (Compound 3) 12,13-(2-methoxycarbonyl-2,3-dihydroxy-butan-1,4-yl)-12,13-dihydro-5,7-dioxo-6H-indolo[2,3-a]pyrrolo[3,4-c]carbazole (Compound 12) 12,13-(2-carboxy-2,3-dihydroxy-butan-1,4-yl)-12,13-dihydro-5,7-dioxo-6H-indolo[2,3-a]pyrrolo[3,4-c]carbazole (Compound 13) 12,13-{2-[(pyridin-4-ylmethyl)carbamoyl]-2,3-dihydroxy-butan-1,4-yl}-12,13-dihydro-5,7-dioxo-6H-indolo[2,3-a]pyrrolo[3,4-c]carbazole (Compound 117) 3,4-dichloro-furan-2,5-dione (6.7 g, 40 mmol) was mixed with 2,4-dimethoxy-benzylamine (6.25 mL) in glacial acetic acid (120 mL). The mixture was heated to 80 C. for 18 hrs. Upon cooling, the mixture was poured over ice and the precipitate was collected by filtration, then washed with water and NaHCO3 (aq.) and dried in a vacuum oven to provide 3,4-dichloro-1-(2,4-dimethoxy-benzyl)-pyrrole-2,5-dione Compound 6a (11.08 g, 87%) as a light orange solid. 1H NMR (d6-DMSO, 300 MHz) delta 3.73 (s, 3H), 3.76 (s, 3H), 4.54 (s, 2H), 6.44 (d, 1H, J=8 Hz), 6.57 (s, 1H), 7.12 (d, H, J=8 Hz); MS m/z 340 (M+2+Na), 338 (M+Na), 318 (M+2H), 316 (M+H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (2,4-Dimethoxyphenyl)methanamine, its application will become more common.

Reference:
Patent; Wilson, Lawrence J.; Murray, William V.; Yang, Shyh-Ming; Yang, Cangming; Wang, Bingbing; US2007/249590; (2007); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 20781-20-8, name is (2,4-Dimethoxyphenyl)methanamine, A new synthetic method of this compound is introduced below., SDS of cas: 20781-20-8

A mixture of 3-hydroxyphthalic anhydride (1.24 g, 7.6 mmol), 2,4-dimethoxybenzylamine (1.14 mL, 7.6 mmol) and acetic acid (5 mL) was heated at 80C for 24 hours. The mixture was allowed to cool and diluted with water (20 mL). The white solid was collected by filtration, washed well with water and dried to give the title compound (1.73 g, 73%). 1H NMR (DMSOd6) 11.00 (1 H, s), 7.62 (1H, dd), 7.29 (1 H, d), 7.21 (1 H, d), 6.90 (1H, d), 6.56 (1 H, d), 6.43 (1 H, dd), 4.59 (2H, s), 3.79 (3H, s), 3.72 (3H, s). MS: [M-H+] 314.

The synthetic route of 20781-20-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; WO2008/44029; (2008); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 20781-20-8, name is (2,4-Dimethoxyphenyl)methanamine, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 20781-20-8, COA of Formula: C9H13NO2

To a solution of ethyl (4aS)- 1 -(4-fluorophenyl)-6-oxo-4,5 ,7,8-tetrahydrobenzo [fjindazole-4a- carboxylate (ig) (3.16 g, 8.92 mmol) and (2,4-dimethoxyphenyl)methanamine (2.68 mL, 17.83 mmol) in DCE (40 mL) was added acetic acid (1.54 mL, 26.75 mmol). After the reaction was stirred at rt for 5 mm and cooled down in an ice-bath, sodium triacetoxyborohydride (5.lg, 24.08 mmol) was added in portions. 5 Minute later, the reaction solution was allowed to warm to rt and continued stirring for 30 mm. The solution was quenched (sat. aq. NaHCO3) and extracted (EtOAc). The organic layers were washed (brine), dried (Na2SO4) and concentrated under reduced pressure. The cmde product was purified by silica gel chromatography (Si02, 0%-75 % EtOAc/hexanes, gradient elution) to provide the title compound (lila) (4.15 g, 92% yield) as an off-white solid. mlz (ESI, +ve ion) = 506.3 [M+Hj.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (2,4-Dimethoxyphenyl)methanamine, and friends who are interested can also refer to it.

Reference:
Patent; ORIC PHARMACEUTICALS, INC.; DU, Xiaohui; EKSTEROWICZ, John; FANTIN, Valeria R.; REW, Yosup; SUN, Daqing; YE, Qiuping; ZHOU, Haiying; KAWAI, Hiroyuki; MOORE, Jared; PHAM, Johnny; WU, Kejia; ZHU, Liusheng; YAMASHITA, Dennis; (288 pag.)WO2018/191283; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 20781-20-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 20781-20-8 as follows.

To a solution of ethyl (4aS)-l-(4-fluorophenyl)-6-oxo-4,5,7,8-tetrahydrobenzo[f]indazole-4a- carboxylate (lg) (3.16 g, 8.92 mmol) and (2,4-dimethoxyphenyl)methanamine (2.68 mL, 17.8 mmol) in DCE (40 mL) was added acetic acid (1.54 mL, 26.8 mmol). After the reaction was stirred at rt for 5 min and cooled down in an ice-bath, sodium triacetoxyborohydride (5.l0g, 24.1 mmol) was added in portions. 5 Minute later, the reaction solution was allowed to warm to rt and continued stirring for 30 min. The solution was quenched (sat. aq. NaHCCE) and extracted (EtOAc). The organic layers were washed (brine), dried (Na2SC>4) and concentrated under reduced pressure. The crude product was purified by silica gel chromatography (0%-75% EtO Ac/hexanes, a gradient elution) to provide the title compound (4a) (4.15 g, 92% yield) as an off-white solid m/z (ESI, +ve ion) = 506.3 [M+H]+

According to the analysis of related databases, 20781-20-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ORIC PHARMACEUTICALS, INC.; DU, Xiaohui; EKSTEROWICZ, John; FANTIN, Valeria R.; REW, Yosup; SUN, Daqing; YE, Qiuping; ZHOU, Haiying; KAWAI, Hiroyuki; MOORE, Jared; PHAM, Johnny; WU, Kejia; ZHU, Liusheng; (116 pag.)WO2020/76999; (2020); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem