Category: 116557-46-1

Adding a certain compound to certain chemical reactions, such as: 116557-46-1, name is 3-Bromo-2-methoxyaniline, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 116557-46-1, SDS of cas: 116557-46-1

A suspension of 3-bromo-2-methoxyaniline (500 mg, 2.47 mmol), bis(pinacolato)diboron (755 mg, 2.97 mmol) and potassium acetate (729 mg, 7.42 mmol) in 1,4-dioxane (8 mL) was sparged with nitrogen for 5 min. Pd(dppf)Cl2·DCM (173 mg, 0.21 mmol) was added and the mixture was heated under reflux for 2.5 h then cooled to room temperature. The reaction was diluted with DCM (35 mL) and washed with water (35 mL). The organic phase was concentrated under reduced pressure then purified by flash column chromatography, eluting with 0-100% EtOAc in isohexane, to return 49h (358 mg, 58%) an off-white solid. 1H NMR (300 MHz, DMSO-d6) delta 6.72-6.83 (m, 3H), 4.80 (s, 2H), 3.64 (s, 3H), 1.28 (s, 12H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Newton, Rebecca; Bowler, Katherine A.; Burns, Emily M.; Chapman, Philip J.; Fairweather, Emma E.; Fritzl, Samantha J.R.; Goldberg, Kristin M.; Hamilton, Niall M.; Holt, Sarah V.; Hopkins, Gemma V.; Jones, Stuart D.; Jordan, Allan M.; Lyons, Amanda J.; Nikki March; McDonald, Neil Q.; Maguire, Laura A.; Mould, Daniel P.; Purkiss, Andrew G.; Small, Helen F.; Stowell, Alexandra I.J.; Thomson, Graeme J.; Waddell, Ian D.; Waszkowycz, Bohdan; Watson, Amanda J.; Ogilvie, Donald J.; European Journal of Medicinal Chemistry; vol. 112; (2016); p. 20 – 32;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 116557-46-1, name is 3-Bromo-2-methoxyaniline, A new synthetic method of this compound is introduced below., Computed Properties of C7H8BrNO

General Procedure: Methyl 2-{[4-(chlorosulfonyl)-2,3-dimethylphenyl]oxy}propanoate (7) (4 g, 13.0 mmol) was dissolved in pyridine (10 mL). After 5 min, 3-bromo-2-chloroaniline (3.22 g, 15.6 mmol) was added. The reaction was complete within a few hours. The reaction mixture was then extracted using diethyl ether. The combined organic phases were washed with 1N HCl and brine, dried over sodium sulfate, filtered, and concentrated in vacuo to afford the title compound which was used without further purification.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Evans, Karen A.; Shearer, Barry G.; Wisnoski, David D.; Shi, Dongchuan; Sparks, Steven M.; Sternbach, Daniel D.; Winegar, Deborah A.; Billin, Andrew N.; Britt, Christy; Way, James M.; Epperly, Andrea H.; Leesnitzer, Lisa M.; Merrihew, Raymond V.; Xu, Robert X.; Lambert, Millard H.; Jin, Jian; Bioorganic and Medicinal Chemistry Letters; vol. 21; 8; (2011); p. 2345 – 2350;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 116557-46-1, name is 3-Bromo-2-methoxyaniline, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C7H8BrNO

Step 3[00174j IntlO (2.0 g, 9.9 mmol) was dissolved in dioxane (40 mL) and the vessel purged with nitrogen for 5 minutes. Next bis(pinacolato)diborone (3.77 g, 14.85 mmol), [1,1 ?-bis(diphenylphosphino)ferrocene] dichloropalladium (II) complex with dichloromethane (404 mg, 0.49 mmol) and potassium acetate (2.91 g, 29.7 mmol) were added. The flask was evacuated and backfilled with nitrogen, and then heated to 100 Cfor 15 hours. Water was added to quench the reaction and the product was then extracted with EtOAc. The combined organic layers were washed with brine (x3), dried over sodium sulfate, filtered, concentrated and purified using automated chromatography (elutes at 40% ethyl acetate) to provide Intl 1 (2.0 g, 8 1%). ?H NMR (400MHz, chloroform-d) oe 7.12 (dd,J=7.3, 1.8 Hz, 1H), 6.96-6.89 (m, 1H), 6.88-6.83 (m, 1H),3.82 (s, 3H), 1.37 (s, 12H). LC retention time 0.65 [J]. m/z: 250 (MHj.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 116557-46-1.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; MOSLIN, Ryan M.; WEINSTEIN, David S.; WROBLESKI, Stephen T.; TOKARSKI, John S.; KUMAR, Amit; WO2014/74661; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 116557-46-1, The chemical industry reduces the impact on the environment during synthesis 116557-46-1, name is 3-Bromo-2-methoxyaniline, I believe this compound will play a more active role in future production and life.

Step 5 To a reaction vial charged with 3-bromo-2-methoxyaniline from Step 4 (0.30 g, 1.485 mmol) and l-(l-ethoxyethyl)-4-(4,4,5,5-tetramethyl-l,3,2-dioxaborolan-2-yl)- lH-pyrazole from Step 3 (0.435 g, 1.633 mmol) in dioxane (2 ml) was added aqueous potassium phosphate (2.0 M) (1.485 ml, 2.97 mmol). The resulting mixture was deoxygenated by bubbling argon through the mixture for ~5 min. PdCl2(dppf) (0.033 g, 0.045 mmol) was then added and the mixture was heated at 110 C for 3h then cooled to rt. The resulting mixture was diluted with EtOAc (100 mL), washed with water, brine, dried over anhyd sodium sulfate, filtered and concentrated to afford a black oil as the crude product mixture. This material was purified by silica gel flash chromatography using hexanes/ethyl acetate solvent mixtures as the eluant. Fractions containing the major uv active component were collected and combined then concentrated under vacuum to afford the desired product, Preparation 9 (355 mg, 1.358 mmol, 91%> yield) as an oil which solidified upon standing. HPLC (method N) RT = 1.58 min. LCMS (m+1) = 262.1.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Bromo-2-methoxyaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; MOSLIN, Ryan M.; WEINSTEIN, David S.; WROBLESKI, Stephen T.; ZHANG, Yanlei; TOKARSKI, John S.; MERTZMAN, Michael E.; LIU, Chunjian; WO2015/69310; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 116557-46-1,Some common heterocyclic compound, 116557-46-1, name is 3-Bromo-2-methoxyaniline, molecular formula is C7H8BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 3-bromo-2-methoxyaniline (3 g), 3-carboxyphenylboronic acid (2.94 g), bis(triphenylphosphine)palladium(II)chloride [PdCl2(PPh3)2] (0.30 g) and potassium carbonate (5.2 g) in ethanol (100 mL) and water (20 mL) was heated to about reflux temperature and stirred for about 28 hours. The hot mixture was filtered to remove the catalyst. The clear filtrate was concentrated under vacuum. To the residue, water (50 mL) and methanol (50 mL) was added, acidified to pH 3-5 using hydrochloric acid and stirred for about 30 minutes at about room temperature. The slurry was filtered, washed with n-hexane (50 mL) and dried in an oven at about 55 C. to about 60 C. for about 12 hours. Yield: 1.8 g 1H NMR (300 MHz in DMSO-d6): delta 8.08 (s, 1H), 7.89-7.92 (d, 1H), 7.73-7.75 (d, 1H), 7.51-7.56 (t, 1H), 6.87-6.92 (t, 1H), 6.72-6.74 (d, 1H), 6.50-6.53 (d, 1H), 3.27 (s, 3H)

The synthetic route of 116557-46-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Glenmark Generics Limited; Upadhye, Bhargav Krishnaji; Jagadale, Shivaji Eknath; Soni, Mukesh; US2015/87845; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 116557-46-1, These common heterocyclic compound, 116557-46-1, name is 3-Bromo-2-methoxyaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[00163] Intermediate 9B. (3-Bromo-2-methoxyphenyl)hydrazine: A suspension of Intermediate 9A (4.0 g, 20 mmol) in 6 M HC1 was cooled to -10 C and a solution of sodium nitrite (1.41 g, 20.8 mmol) in water (5 mL) was added slowly to keep the temperature below 0 C. After the addition, the reaction was stirred for additional 20 min at -10 C. A solution of tin (II) chloride (11.26 g, 59.39 mmol) in cone. HC1 (20 mL) was added slowly, resulting in precipitation. After 30 min, the precipitate was filtered, washed with cone. HC1 and then water, suspended in 10% NaOH solution, and extracted with EtOAc. The combined organics were dried over MgS04, filtered, and evaporated to give Intermediate 9B (1.8 g, 42%), which was used directly in the next step. LCMS (ESI) m/z 200, 202 (M-NH3+H, M-NH3+2+H)+, RT = 1.09 min (Method A).

The synthetic route of 116557-46-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; L’HEUREUX, Alexandre; HIEBERT, Sheldon; HU, Carol; LAM, Patrick Y.S.; LLOYD, John; PI, Zulan; QIAO, Jennifer X.; THIBEAULT, Carl; TORA, George O.; YANG, Wu; WANG, Yufeng; WANG, Tammy C.; BOWSHER, Michael S.; RUEL, Rejean; WO2014/22343; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 116557-46-1,Some common heterocyclic compound, 116557-46-1, name is 3-Bromo-2-methoxyaniline, molecular formula is C7H8BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In the flask will come from step 23-bromo-2-methoxyaniline (1.94 g, 9.60 mmol)4,4,4 ‘, 4’, 5,5,5 ‘, 5′-octamethyl-2,2’-bis(1,3,2-dioxaborolane)(3.66 g, 14.40 mmol),PdCl2 (dppf) -CH2Cl2 (0.392 g, 0.480 mmol) and potassium acetate (2.83 g, 28.8 mmol) in dioxane (32 mL)The solution was heated to reflux (about 100 & lt; 0 & gt; C) overnight,Then cooled to room temperature,Concentrated on diatomaceous earth in a vacuum.The crude product was purified by flash chromatography using 120 g of a silica gel column (solid loading) with 0-50% ethyl acetate / hexane. The appropriate fractions were collected (eluted with nearly 25% EtOAc / hexanes) and concentrated in vacuo,To give 2-methoxy-3- (4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl) aniline in an off-white crystalline solid form (1.47 g , 5.78 mmol, 60.2% yield).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3-Bromo-2-methoxyaniline, its application will become more common.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; MOSLIN,, RYAN M.; WEINSTEIN,, DAVID S.; WROBLESKI,, STEPHEN T.; ZHANG,, YANLEI; TOKARSKI,, JOHN S.; MERTZMAN,, MICHAEL E.; LIU,, CHUNJIAN; (124 pag.)TWI582077; (2017); B;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 116557-46-1, A common heterocyclic compound, 116557-46-1, name is 3-Bromo-2-methoxyaniline, molecular formula is C7H8BrNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

This material (1.8 g) is taken up in methanol (100 ml) containing concentrated hydrochloric acid (0.6 ml), treated with 10% palladium on carbon and hydrogenated at 45 psi for 8 hours. The catalyst is filtered off and the solvent removed at reduced pressure to afford 4-tert-butoxypiperidine hydrochloride.

The synthetic route of 116557-46-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CIBA-GEIGY AG; EP475895; (1992); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 116557-46-1, name is 3-Bromo-2-methoxyaniline, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 116557-46-1, Recommanded Product: 116557-46-1

A suspension of 3-bromo-2-methoxyaniline (500 mg, 2.47 mmol), bis(pinacolato)diboron (755 mg, 2.97 mmol) and potassium acetate (729 mg, 7.42 mmol) in 1,4-dioxane (8 mL) was sparged with nitrogen for 5 min. Pd(dppf)Cl2·DCM (173 mg, 0.21 mmol) was added and the mixture was heated under reflux for 2.5 h then cooled to room temperature. The reaction was diluted with DCM (35 mL) and washed with water (35 mL). The organic phase was concentrated under reduced pressure then purified by flash column chromatography, eluting with 0-100% EtOAc in isohexane, to return 49h (358 mg, 58%) an off-white solid. 1H NMR (300 MHz, DMSO-d6) delta 6.72-6.83 (m, 3H), 4.80 (s, 2H), 3.64 (s, 3H), 1.28 (s, 12H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Newton, Rebecca; Bowler, Katherine A.; Burns, Emily M.; Chapman, Philip J.; Fairweather, Emma E.; Fritzl, Samantha J.R.; Goldberg, Kristin M.; Hamilton, Niall M.; Holt, Sarah V.; Hopkins, Gemma V.; Jones, Stuart D.; Jordan, Allan M.; Lyons, Amanda J.; Nikki March; McDonald, Neil Q.; Maguire, Laura A.; Mould, Daniel P.; Purkiss, Andrew G.; Small, Helen F.; Stowell, Alexandra I.J.; Thomson, Graeme J.; Waddell, Ian D.; Waszkowycz, Bohdan; Watson, Amanda J.; Ogilvie, Donald J.; European Journal of Medicinal Chemistry; vol. 112; (2016); p. 20 – 32;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 116557-46-1, name is 3-Bromo-2-methoxyaniline, A new synthetic method of this compound is introduced below., Computed Properties of C7H8BrNO

General Procedure: Methyl 2-{[4-(chlorosulfonyl)-2,3-dimethylphenyl]oxy}propanoate (7) (4 g, 13.0 mmol) was dissolved in pyridine (10 mL). After 5 min, 3-bromo-2-chloroaniline (3.22 g, 15.6 mmol) was added. The reaction was complete within a few hours. The reaction mixture was then extracted using diethyl ether. The combined organic phases were washed with 1N HCl and brine, dried over sodium sulfate, filtered, and concentrated in vacuo to afford the title compound which was used without further purification.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Evans, Karen A.; Shearer, Barry G.; Wisnoski, David D.; Shi, Dongchuan; Sparks, Steven M.; Sternbach, Daniel D.; Winegar, Deborah A.; Billin, Andrew N.; Britt, Christy; Way, James M.; Epperly, Andrea H.; Leesnitzer, Lisa M.; Merrihew, Raymond V.; Xu, Robert X.; Lambert, Millard H.; Jin, Jian; Bioorganic and Medicinal Chemistry Letters; vol. 21; 8; (2011); p. 2345 – 2350;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem