Category: 111-90-0

Ethers are a class of organic compounds that contain an ether group—an oxygen atom connected to two alkyl or aryl groups. 111-90-0, formula is C6H14O3, Name is Diethylene Glycol Monoethyl Ether.They have the general formula R–O–R′, where R and R′ represent the alkyl or aryl groups. HPLC of Formula: 111-90-0.

Romdhani, Asma;Martinez, Fleming;Pena, Angeles;Rahimpour, Elaheh;Jouyban, Abolghasem;Acree, William E. Jr. research published 《 Solubility of trans-resveratrol in {ethanol (1) + water (2)} mixtures revisited: Correlation, dissolution thermodynamics and preferential solvation》, the research content is summarized as follows. Reported equilibrium mole fraction solubility values of trans-resveratrol in some aqueous-ethanolic mixtures in the temperature interval from (273.2 to 323.2) K were correlated by means of some cosolvency models, like multi-linear models of Jouyban-Acree and Jouyban-Acree-van’t Hoff and non-linear models of the modified Wilson and Buchowski-Ksiazczak. Apparent thermodn. functions of the dissolution processes were computed using the van’t Hoff and Gibbs equations. Gibbs energy and enthalpy were pos. in all cases, while neg. and pos. entropies were observed The plot of enthalpy vs.Gibbs energy of dissolution was non-linear with neg. slopes in the region of 0.00 ≤x₁ ≤ 0.60 but pos. slope in the region of 0.60 ≤ x₁ ≤ 0.90. Further, by means of the inverse Kirkwood-Buff integrals is observed that trans-resveratrol is preferentially solvated by water in water-rich mixtures but preferentially solvated by ethanol in the composition interval of 0.24 ≤ x₁ ≤ 1.00.

HPLC of Formula: 111-90-0, Diethylene glycol monoethyl ether appears as a colorless, slightly viscous liquid with a mild pleasant odor. Flash point near 190°F. Used to make soaps, dyes, and other chemicals.
Diethylene glycol monoethyl ether is a primary alcohol that is ethanol substituted by a 2-ethoxyethoxy group at position 2. It has a role as a protic solvent. It is a diether, a primary alcohol and a hydroxypolyether. It derives from a diethylene glycol., 111-90-0.

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Ethers do have nonbonding electron pairs on their oxygen atoms, 111-90-0, formula is C6H14O3, Name is Diethylene Glycol Monoethyl Ether. The ability to form hydrogen bonds with other compounds makes ethers particularly good solvents for a wide variety of organic compounds and a surprisingly large number of inorganic compounds. Safety of Diethylene Glycol Monoethyl Ether.

Rosso, Annalisa;Almouazen, Eyad;Pontes, Jorge;Andretto, Valentina;Leroux, Marine;Romasko, Etienne;Azzouz-Maache, Samira;Bordes, Claire;Coste, Isabelle;Renno, Touffic;Giraud, Stephane;Briancon, Stephanie;Lollo, Giovanna research published 《 Supersaturable self-microemulsifying delivery systems: an approach to enhance oral bioavailability of benzimidazole anticancer drugs》, the research content is summarized as follows. Abstract: This study explored the design of supersaturable self-microemulsifying drug delivery systems (S-SMEDDS) to address poor solubility and oral bioavailability of a novel benzimidazole derivative anticancer drug (BI). Firstly, self-microemulsifying drug delivery systems SMEDDS made of Miglyol 812, Kolliphor RH40, Transcutol HP, and ethanol were prepared and loaded with the BI drug. Upon dispersion, the systems formed neutrally charged droplets of around 20 nm. However, drug precipitation was observed following incubation with simulated gastric fluid (pH 1.2). Aiming at reducing this precipitation and enhancing drug payload, supersaturable systems were then prepared by adding 1% hydroxypropyl cellulose as precipitation inhibitor. Supersaturable systems maintained a higher amount of drug in a supersaturated state in gastric medium compared with conventional formulations and were stable in simulated intestinal medium (pH 6.8). In vitro cell studies using Caco-2 cell line showed that these formulations reduced in a transient manner the transepithelial elec. resistance of the monolayers without toxicity. Accordingly, confocal images revealed that the systems accumulated at tight junctions after a 2 h exposure. In vivo pharmacokinetic studies carried out following oral administration of BI-loaded S-SMEDDS, SMEDDS, and free drug to healthy mice showed that supersaturable systems promoted drug absorption compared with the other formulations. Overall, these data highlight the potential of using the supersaturable approach as an alternative to conventional SMEDDS for improving oral systemic absorption of lipophilic drugs.

111-90-0, Diethylene glycol monoethyl ether appears as a colorless, slightly viscous liquid with a mild pleasant odor. Flash point near 190°F. Used to make soaps, dyes, and other chemicals.
Diethylene glycol monoethyl ether is a primary alcohol that is ethanol substituted by a 2-ethoxyethoxy group at position 2. It has a role as a protic solvent. It is a diether, a primary alcohol and a hydroxypolyether. It derives from a diethylene glycol., Safety of Diethylene Glycol Monoethyl Ether

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Ethers can again be classified into two varieties: if the alkyl or aryl groups are the same on both sides of the oxygen atom, 111-90-0, formula is C6H14O3, Name is Diethylene Glycol Monoethyl Ether. Then it is a simple or symmetrical ether, whereas if they are different, the ethers are called mixed or unsymmetrical ethers. Recommanded Product: Diethylene Glycol Monoethyl Ether.

Phillips, Robert;Whelton, Andrew J.;Eckelman, Matthew J. research published 《 Incorporating use phase chemical leaching and water quality testing for life cycle toxicity assessment of cross-linked polyethylene (PEX) piping》, the research content is summarized as follows. Life cycle assessment (LCA) is increasingly being considered in material selection decisions for residential drinking water piping, but chem. leaching during the use phase has typically been excluded, even though the delivery of safe water is the core function of water distribution infrastructure. We have quantified the contribution of leached organics to life cycle human toxicity of piping materials through the integration of empirical leaching data within LCA. Eight cross-linked polyethylene (PEX) pipe brands were examined Upstream emissions from PEX pipe production were combined with empirical total organic carbon (TOC) data from leaching tests for new pipes. The total mass of organic contaminants ingested over the pipe′s lifetime was estimated by fitting leaching data with kinetic models and integrating leaching concentrations and daily water use over time, rather than using an initial concentration that does not accurately depict actual lifetime exposures. Potential human toxicity from use phase ingestion was evaluated using a range of human effect factors from the consensus USEtox model to create plausible bounds of toxicity through different exposure and effect scenarios. New non-carcinogenic human toxicol. effect factors were derived for approx. half of the 62 leached organic compounds identified. Results indicate that potential human toxicity from upstream pipe production generally exceeds use phase toxicity, but that leached contaminants can be a substantial contributor to overall life cycle toxicity, depending on the PEX brand, particularly for carcinogenic effects. Deleterious effects can be reduced both by thorough system flushing after initial installation and periods of stagnation, but also through improvements in manufacturing processes that reduce upstream emissions. The bounding approach demonstrates a viable method for considering water quality in LCA when comprehensive characterization and concentration data are not available.

Recommanded Product: Diethylene Glycol Monoethyl Ether, Diethylene glycol monoethyl ether appears as a colorless, slightly viscous liquid with a mild pleasant odor. Flash point near 190°F. Used to make soaps, dyes, and other chemicals.
Diethylene glycol monoethyl ether is a primary alcohol that is ethanol substituted by a 2-ethoxyethoxy group at position 2. It has a role as a protic solvent. It is a diether, a primary alcohol and a hydroxypolyether. It derives from a diethylene glycol., 111-90-0.

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Ethers can again be classified into two varieties: if the alkyl or aryl groups are the same on both sides of the oxygen atom, 111-90-0, formula is C6H14O3, Name is Diethylene Glycol Monoethyl Ether. Then it is a simple or symmetrical ether, whereas if they are different, the ethers are called mixed or unsymmetrical ethers. HPLC of Formula: 111-90-0.

Pipertzis, Achilleas;Papamokos, George;Sachnik, Oskar;Allard, Sybille;Scherf, Ullrich;Floudas, George research published 《 Ionic Conductivity in Polyfluorene-Based Diblock Copolymers Comprising Nanodomains of a Polymerized Ionic Liquid and a Solid Polymer Electrolyte Doped with LiTFSI》, the research content is summarized as follows. Diblock copolymer electrolytes based on a π-conjugated polyfluorene (PF) backbone were synthesized comprising nanodomains of a polymerized ionic liquid (PIL) and of a solid polymer electrolyte (SPE). The former consists of a single-ion conductor based on an imidazolium alkyl chain with a [Br]^– counteranion grafted on the PF backbone. The latter consists of short ethylene oxide (EO) chains, grafted on the PF backbone and further doped with LiTFSI. The two nanophases support ionic conductivity, whereas the rigid PF backbone provides the required mech. stability. In the absence of LiTFSI, ionic conductivity in the PIL nanophase is low and exhibits an Arrhenius temperature dependence. LiTFSI substitution enhances ionic conductivity by about 3 orders of magnitude and further changes to a Vogel-Fulcher-Tammann temperature dependence. However, at ambient temperature, ionic conductivity is lower than in the corresponding PEO/LiTFSI electrolytes. X-ray studies and thermal anal. revealed that the conjugated backbone imparts liquid-crystalline order that can be fine-tuned through the EO side group length. Ionic conductivity measurements performed as a function of pressure identified local jumps of [Li]⁺ and [Br]^– ions in the resp. SPE/PIL nanophases as responsible for the ionic conductivity Between the two ions, it is [Li]⁺ that has the major contribution to the ionic conductivity The current results provide designing rules for new copolymers that comprise two different ionic nanodomains (PIL and SPE) and a conjugated backbone that can further support electronic conduction.

HPLC of Formula: 111-90-0, Diethylene glycol monoethyl ether appears as a colorless, slightly viscous liquid with a mild pleasant odor. Flash point near 190°F. Used to make soaps, dyes, and other chemicals.
Diethylene glycol monoethyl ether is a primary alcohol that is ethanol substituted by a 2-ethoxyethoxy group at position 2. It has a role as a protic solvent. It is a diether, a primary alcohol and a hydroxypolyether. It derives from a diethylene glycol., 111-90-0.

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Ethers feature bent C–O–C linkages. In dimethyl ether, the bond angle is 111° and C–O distances are 141 pm. 111-90-0, formula is C6H14O3, Name is Diethylene Glycol Monoethyl Ether. The barrier to rotation about the C–O bonds is low. The bonding of oxygen in ethers, alcohols, and water is similar. In the language of valence bond theory, the hybridization at oxygen is sp3. Computed Properties of 111-90-0.

Pires, Patricia C.;Fazendeiro, Ana C.;Rodrigues, Marcio;Alves, Gilberto;Santos, Adriana O. research published 《 Nose-to-brain delivery of phenytoin and its hydrophilic prodrug fosphenytoin combined in a microemulsion – formulation development and in vivo pharmacokinetics.》, the research content is summarized as follows. Phenytoin is a low aqueous solubility antiepileptic drug, but its phosphate ester prodrug fosphenytoin is soluble, although less permeable. In a previous study, the intranasal administration of aqueous-based formulations of fosphenytoin led to high but delayed phenytoin bioavailability compared to the i.v. route. In this work, we hypothesized that formulating an association of the prodrug fosphenytoin and the drug phenytoin (the active and diffusible form), could result in a faster and/or more effective brain targeting. Hence, nano or microemulsions containing both active drug and prodrug were developed and characterized regarding viscosity, osmolality, pH, mean size and in vitro drug release. Then, in vivo pharmacokinetics of a selected microemulsion containing fosphenytoin and phenytoin was evaluated in mice following intranasal administration and compared with a similar microemulsion containing fosphenytoin only. Both microemulsions led to higher brain drug levels at short time points than previously developed simpler aqueous based fosphenytoin formulations, likely due to the microemulsion′s permeation enhancing effect. In addition, having a small amount of phenytoin in the formulation led to an equivalent maximum brain drug concentration and an overall higher absolute bioavailability, with a prolonged drug exposure. Hence, it can be concluded that if there is a need for a fast and prolonged therapeutic effect, a drug/phosphate ester prodrug combination in a microemulsion is ideal, but if a fast effect is all that is needed, having the prodrug alone could be enough, while considering a formulation with permeation enhancing components.

111-90-0, Diethylene glycol monoethyl ether appears as a colorless, slightly viscous liquid with a mild pleasant odor. Flash point near 190°F. Used to make soaps, dyes, and other chemicals.
Diethylene glycol monoethyl ether is a primary alcohol that is ethanol substituted by a 2-ethoxyethoxy group at position 2. It has a role as a protic solvent. It is a diether, a primary alcohol and a hydroxypolyether. It derives from a diethylene glycol., Computed Properties of 111-90-0

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Ethers lack the hydroxyl groups of alcohols. Without the strongly polarized O―H bond, ether molecules cannot engage in hydrogen bonding with each other. 111-90-0, formula is C6H14O3, Name is Diethylene Glycol Monoethyl Ether. Ethers do have nonbonding electron pairs on their oxygen atoms, however, and they can form hydrogen bonds with other molecules (alcohols, amines, etc.) that have O―H or N―H bonds. Synthetic Route of 111-90-0.

Polonini, Hudson;Taylor, Sarah;Zander, Clark research published 《 Compatibility of Different Formulations in TrichoConceptTM Vehicles for Hair Treatments》, the research content is summarized as follows. The wide variety of potential pathogeneses for alopecia and the wide variety of active pharmaceutical ingredients (APIs) to treat and manage those pathogeneses highlight the importance of the development of stable and effective topical treatments. Topical options for alopecia on the market remain limited and oral products may result in unwanted systemic adverse effects. This study is meant to fill the gap by determining compatibility in terms of beyond-use date (BUD) of APIs with theor. or demonstrated benefits for topical use for alopecia. The compatibility of seven formulations was tested: F1 = clobetasol 0.05% in TrichoWashTM; F2 = ketoconazole 2% in TrichoWashTM; F3 = spironolactone 1% in TrichoWashTM; F4 = latanoprost 0.1% in TrichoCreamTM; F5 = pyridoxine HCl 0.5%, vitamin A acetate 1%, and vitamin E succinate 12.1 IU in TrichoCondTM; F6 = Caffeine 2%, menthol 1%, and pyridoxine HCl 0.5% in TrichoWashTM; F7 = Latanoprost 0.1%, minoxidil 5%, and finasteride 0.25% in TrichoSolTM. All formulations presented a BUD of 6 mo, except for F4 and F7, which showed compatibility for 3 mo. This validates the compatibility of the APIs with the TrichotechTM vehicles, and that they are highly convenient for compounding pharmacies.

Synthetic Route of 111-90-0, Diethylene glycol monoethyl ether appears as a colorless, slightly viscous liquid with a mild pleasant odor. Flash point near 190°F. Used to make soaps, dyes, and other chemicals.
Diethylene glycol monoethyl ether is a primary alcohol that is ethanol substituted by a 2-ethoxyethoxy group at position 2. It has a role as a protic solvent. It is a diether, a primary alcohol and a hydroxypolyether. It derives from a diethylene glycol., 111-90-0.

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Ethers are a class of organic compounds that contain an ether group—an oxygen atom connected to two alkyl or aryl groups. 111-90-0, formula is C6H14O3, Name is Diethylene Glycol Monoethyl Ether.They have the general formula R–O–R′, where R and R′ represent the alkyl or aryl groups. Reference of 111-90-0.

Praveena, Pepakayala;Vijetha, K. Anie;Kumar, K. Satyendhar research published 《 Formulation and optimisation of self microemulsifying mouth dissolving film of aripiprazole》, the research content is summarized as follows. Aim to formulate and optimization studies of self micro emulsifying mouth dissolving film (SMMDF) of Aripiprazole an atypical Antipsychotic schizophrenic BCS class α drug, a partial D2, 5-HT1A agonist. SMMDF are the oral mucosa drug delivery systems which are formulated by incorporation of Solubility Enhanced drug containing L-SMEDDS targeted for the rapid absorption rate with instant drug release which mainly aimed and focused to treat diseases those need immediate and instant medication within seconds time like Angina pectoris, congestive heart failure, Asthma, Parkinson′s convulsions, Antihistamines for allergies etc. On the basis of Aripiprazole solubility study in various excipients, coconut oil and Transcutol and PEG 400 F1 and F2 formulations of SMEDDS are prepared When compared to the F2 formula, F1 COPT4:1F1(2:8) pos. results, globule size-0.158μm, self-emulsifying time-30.45 ± 0.2s, drug loading efficiency-99.39 % ± 0.17 along with good in-vitro dissolution studies and follows first order kinetics. COPT4:1F1(2:8) SMEDDS formula was incorporated into a standard mouth film formula and prepared F3, F4, F5 SMMDF successfully and evaluated for target onset of time and resultant drug release of the SMMDF F4 formulation was found to be less than 4mins.

111-90-0, Diethylene glycol monoethyl ether appears as a colorless, slightly viscous liquid with a mild pleasant odor. Flash point near 190°F. Used to make soaps, dyes, and other chemicals.
Diethylene glycol monoethyl ether is a primary alcohol that is ethanol substituted by a 2-ethoxyethoxy group at position 2. It has a role as a protic solvent. It is a diether, a primary alcohol and a hydroxypolyether. It derives from a diethylene glycol., Reference of 111-90-0

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Ethers are a class of organic compounds that contain an ether group—an oxygen atom connected to two alkyl or aryl groups. 111-90-0, formula is C6H14O3, Name is Diethylene Glycol Monoethyl Ether.They have the general formula R–O–R′, where R and R′ represent the alkyl or aryl groups. Related Products of 111-90-0.

Qu, Biao;Wang, Xiao-lin;Zheng, De-chong;Mai, Chu-tian;Liu, Zhong-qiu;Zhou, Hua;Xie, Ying research published 《 Novel treatment for refractory rheumatoid arthritis with total glucosides of paeony and nobiletin codelivered in a self-nanoemulsifying drug delivery system》, the research content is summarized as follows. Patients with refractory rheumatoid arthritis (RA) remain a substantial clin. problem, while the overexpression of P-glycoprotein (P-gp) on their lymphocytes may contribute to resistance to anti-rheumatic drugs. This study aims to develop a novel treatment for refractory RA consisting of the combination of total glucosides of paeony (TGPs) and the P-gp inhibitor nobiletin (N), which are codelivered in a self-nanoemulsifying drug delivery system (SNEDDS). Based on the solubility, compatibility, and pseudoternary phase diagram tests, a nano-SNEDDS formulation composed of capryol 90-cremophor EL35-tcranscutol HP (CET) to codeliver TGP and N was developed, and this formulation increased the bioavailability of TGP by 435.04% (indicated with paeoniflorin). A modified adjuvant-induced arthritis (AIA) rat model was verified for the overexpression of P-gp in lymphocytes and resistance to methotrexate (MTX) treatment at the reported anti-inflammatory dosage. CET formulation not only increased the solubility and permeability of TGP but also inhibited the function and expression of P-gp, leading to enhanced bioavailability and intracellular concentration in the lymphocytes of AIA rats and consequently boosting the anti-arthritic effects of TGP. Moreover, TGP and N coloaded CET reduced the expression of P-gp in AIA rats partly by inhibiting the phosphorylated AKT and HIF-1α pathways. In summary, TGP-N coloaded SNEDDS is a novel and effective treatment for refractory RA.

Related Products of 111-90-0, Diethylene glycol monoethyl ether appears as a colorless, slightly viscous liquid with a mild pleasant odor. Flash point near 190°F. Used to make soaps, dyes, and other chemicals.
Diethylene glycol monoethyl ether is a primary alcohol that is ethanol substituted by a 2-ethoxyethoxy group at position 2. It has a role as a protic solvent. It is a diether, a primary alcohol and a hydroxypolyether. It derives from a diethylene glycol., 111-90-0.

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Ethers feature bent C–O–C linkages. In dimethyl ether, the bond angle is 111° and C–O distances are 141 pm. 111-90-0, formula is C6H14O3, Name is Diethylene Glycol Monoethyl Ether. The barrier to rotation about the C–O bonds is low. The bonding of oxygen in ethers, alcohols, and water is similar. In the language of valence bond theory, the hybridization at oxygen is sp3. Reference of 111-90-0.

Omachi, Yoshihiro research published 《 Gastroretentive Sustained-Release Tablets Combined with a Solid Self-Micro-Emulsifying Drug Delivery System Adsorbed onto Fujicalin》, the research content is summarized as follows. Abstract : Gastroretentive drug delivery systems (GRDDS) get retained in the stomach for a long time, thus facilitating the absorption of drugs in the upper gastrointestinal tract. However, drugs that are difficult to dissolve or unstable in an acidic environment are not suitable for GRDDS. The current study designs GRDDS combined with a self-micro-emulsifying drug delivery system (SMEDDS) for drugs with solubility or stability problems in the stomach. The model drug fenofibrate was formulated into the optimized liquid SMEDDS composed of 50 weight/weight% Capryol PGMC, 40 weight/weight% Kolliphor RH40, and 10 weight/weight% Transcutol HP and solidified through adsorption on several porous adsorbents. In a dissolution medium at pH 1.2, the powd. SMEDDS using Fujicalin dissolved quickly and achieved higher drug dissolution than other adsorbents. Based on these results, a gastroretentive bilayer tablet consisting of a drug release layer and a swelling layer was designed. The drug release layer was formulated with the powd. SMEDDS and hydroxypropyl methylcellulose (HPMC) as a release modifier. HPMC was also added to the swelling layer as a water-swellable polymer. The dissolution rate depended on the viscosity of the HPMC in the drug release layer. The time for 90% drug release was extended from 3.7 to 12.0 h by increasing the viscosity grade of HPMC from 0.1 to 100 K. Moreover, the tablet swelled and maintained a size comparable to a human pylorus diameter or more for at least 24 h. This GRDDS could apply to a broader range of drug candidates.

111-90-0, Diethylene glycol monoethyl ether appears as a colorless, slightly viscous liquid with a mild pleasant odor. Flash point near 190°F. Used to make soaps, dyes, and other chemicals.
Diethylene glycol monoethyl ether is a primary alcohol that is ethanol substituted by a 2-ethoxyethoxy group at position 2. It has a role as a protic solvent. It is a diether, a primary alcohol and a hydroxypolyether. It derives from a diethylene glycol., Reference of 111-90-0

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Ethers lack the hydroxyl groups of alcohols. Without the strongly polarized O―H bond, ether molecules cannot engage in hydrogen bonding with each other. 111-90-0, formula is C6H14O3, Name is Diethylene Glycol Monoethyl Ether. Ethers do have nonbonding electron pairs on their oxygen atoms, however, and they can form hydrogen bonds with other molecules (alcohols, amines, etc.) that have O―H or N―H bonds. Product Details of C6H14O3.

Osorio, Irmis P.;Martinez, Fleming;Pena, Maria A.;Jouyban, Abolghasem;Acree, William E. Jr research published 《 Extended Hildebrand solubility approach applied to sulphadiazine in aqueous binary mixtures of Carbitol and N-methyl-2-pyrrolidone at 313.15 K》, the research content is summarized as follows. Extended Hildebrand Solubility Approach (EHSA) was applied in this research to analyze the equilibrium solubility of sulphadiazine in some {N-methyl-2-pyrrolidone (1) + water (2)} and {Carbitol (1) + water (2)} mixtures at 313.15 K. Reported exptl. solubilities and melting properties of this drug were used for EHSA calculations Good predictive character of EHSA (with mean deviations lower than 1.7%) was found by using regular polynomials in order five by correlating the interaction parameter (W) and the Hildebrand solubility parameter of solvent mixtures free of drug (δ₁₊₂). However, the predictive character of EHSA was almost the same as obtained when logarithmic drug solubilities (log x₃) were correlated with δ₁₊₂ by using a fifth-degree regular polynomial.

111-90-0, Diethylene glycol monoethyl ether appears as a colorless, slightly viscous liquid with a mild pleasant odor. Flash point near 190°F. Used to make soaps, dyes, and other chemicals.
Diethylene glycol monoethyl ether is a primary alcohol that is ethanol substituted by a 2-ethoxyethoxy group at position 2. It has a role as a protic solvent. It is a diether, a primary alcohol and a hydroxypolyether. It derives from a diethylene glycol., Product Details of C6H14O3

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem