Category: 103-50-4

I found the field of Pharmacology & Pharmacy very interesting. Saw the article Discovery of Novel and Highly Potent Resorcinol Dibenzyl Ether-Based PD-1/PD-L1 Inhibitors with Improved Drug-like and Pharmacokinetic Properties for Cancer Treatment published in 2020. Recommanded Product: Benzyl ether, Reprint Addresses Chen, JJ (corresponding author), Southern Med Univ, Sch Pharmaceut Sci, Guangdong Prov Key Lab New Drug Screening, Guangzhou 510515, Peoples R China.. The CAS is 103-50-4. Through research, I have a further understanding and discovery of Benzyl ether

A series of programmed cell death-1 (PD-1)/programmed cell death ligand 1 (PD-L1) inhibitors based on the resorcinol diphenyl ether scaffold were discovered by incorporating hydrophilic moieties into the side chain and converting into the corresponding hydrochloride salt. Among these compounds, P18 showed the highest inhibitory activity against PD-1/PD-L1 with an IC50 value of 9.1 nM in a homogeneous time-resolved fluorescence binding assay. Besides, P18 promoted HepG2 cell death dose dependently in a HepG2/PD-L1 and Jurkat/PD-1 coculture cell model. Further, P18 demonstrated significantly higher water solubility (17.61 mg/mL) and improved pharmacokinetics (e.g., t(1/2) of similar to 20 h and oral bioavailability of 12%) than the previous analogues. Moreover, P18 was highly effective in suppressing tumor growth in an immune checkpoint humanized mouse model without apparent toxicity. Collectively, these results suggest that compound P18 represents a promising PD-1/PD-L1 inhibitor worthy of further investigation as a potential anticancer agent.

About Benzyl ether, If you have any questions, you can contact Cheng, BB; Wang, W; Niu, XG; Ren, YC; Liu, T; Cao, H; Wang, SH; Tu, YF; Chen, JX; Liu, SW; Yang, XC; Chen, JJ or concate me.. Recommanded Product: Benzyl ether

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

In 2019 BIOMASS BIOENERG published article about TG-FTIR; ENERGY-BALANCE; BEHAVIOR; BIOMASS; WASTE; COMBUSTION; DEGRADATION; TEMPERATURE; PERFORMANCE; CELLULOSE in [Tahir, Mudassir Hussain] Univ Sci & Technol China, Dept Polymer Sci & Engn, CAS Key Lab Soft Matter Chem, 96 Jinzhai Rd, Hefei 230026, Anhui, Peoples R China; [Zhao, Zilong] Harbin Inst Technol Shenzhen, Sch Civil & Environm Engn, Grad Sch, Shenzhen 518055, Peoples R China; [Ren, Jianmin] Chongqing Technol & Business Univ, Coll Environm & Resource, Chongqing 400067, Peoples R China; [Rasool, Tanveer] Natl Inst Technol, Dept Chem Engn, Srinagar, Jammu & Kashmir, India; [Naqvi, Salman Raza] Natl Univ Sci & Technol, Sch Chem & Mat Engn, H-12, Islamabad, Pakistan in 2019, Cited 41. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4. Formula: C14H14O

This study illustrated the pyrolysis of banana peel (BP) as a potential waste management solution. Samples were characterized through Fourier transform infrared spectrometry (FTIR), elemental analysis, and high heating value (HHV) calculation. After pyrolysis experiments were performed at different heating rates (10, 20, 30, and 40 degrees C min(-1)) by using a thermogravimetric analyzer coupled with FTIR (TG-FTIR), the apparent activation energies were computed with Friedman, Kissinger-Akahira-Sunose (KAS), and Flynn-Wall-Ozawa (FWO) methods, and the evolved gaseous products were analyzed simultaneously. During pyrolysis, BP underwent three devolatilization steps accompanied by the evolution of some major gaseous products, including CO2, CH4, H2O, CH3COOH, C=C, C6H5OH, HCOOH, and CH3CH2OH. Among them, C=C, CH3COOH, and CO2 accounted for approximately 71.56% of the total gaseous products. Gas evolution was more significantly influenced by the pyrolysis temperature than by the heating rate. Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) analysis confirmed the presence of some high-energy compounds and valuable chemicals containing aromatic, aldehyde, ketone, and other functional groups. In terms of preliminary energy balance, more than 70% of the total energy output was attributed to the liquid pyrolytic products followed by the solid and gaseous products. The energy recovery ratio of BP pyrolysis was superior to that of other fuel feedstocks. This work provided insights into resolving environmental problems associated with BP management by pyrolyzing BP as a potential source of renewable bioenergy.

About Benzyl ether, If you have any questions, you can contact Tahir, MH; Zhao, ZL; Ren, JM; Rasool, T; Naqvi, SR or concate me.. Formula: C14H14O

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Authors Woo, S; Nam, D; Chang, W; Ko, Y; Lee, S; Song, Y; Yeom, B; Moon, JH; Lee, SW; Cho, J in WILEY-V C H VERLAG GMBH published article about in [Woo, Seunghui; Nam, Donghyeon; Chang, Woojae; Ko, Younji; Lee, Seokmin; Song, Yongkwon; Cho, Jinhan] Korea Univ, Dept Chem & Biol Engn, 145 Anam Ro, Seoul 02841, South Korea; [Yeom, Bongjun] Hanyang Univ, Dept Chem Engn, 222 Wangsimni Ro, Seoul 04763, South Korea; [Moon, Jun Hyuk] Sogang Univ, Dept Chem & Biomol Engn, Baekbeom Ro 35, Seoul 04107, South Korea; [Lee, Seung Woo] Georgia Inst Technol, George W Woodruff Sch Mech Engn, North Ave NW, Atlanta, GA 30332 USA; [Cho, Jinhan] Korea Univ, KU KIST Grad Sch Converging Sci & Technol, 145 Anam Ro, Seoul 02841, South Korea in 2021, Cited 61. Computed Properties of C14H14O. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4

Electrical conductivity, mechanical flexibility, and large electroactive surface areas are the most important factors in determining the performance of various flexible electrodes in energy storage devices. Herein, a layer-by-layer (LbL) assembly-induced metal electrodeposition approach is introduced to prepare a variety of highly porous 3D-current collectors with high flexibility, metallic conductivity, and large surface area. In this study, a few metal nanoparticle (NP) layers are LbL-assembled onto insulating paper for the preparation of conductive paper. Subsequent Ni electroplating of the metal NP-coated substrates reduces the sheet resistance from approximate to 10(3) to <0.1 omega sq(-1) while maintaining the porous structure of the pristine paper. Particularly, this approach is completely compatible with commercial electroplating processes, and thus can be directly extended to electroplating applications using a variety of other metals in addition to Ni. After depositing high-energy MnO NPs onto Ni-electroplated papers, the areal capacitance increases from 68 to 811 mF cm(-2) as the mass loading of MnO NPs increases from 0.16 to 4.31 mg cm(-2). When metal NPs are periodically LbL-assembled with the MnO NPs, the areal capacitance increases to 1710 mF cm(-2). Computed Properties of C14H14O. About Benzyl ether, If you have any questions, you can contact Woo, S; Nam, D; Chang, W; Ko, Y; Lee, S; Song, Y; Yeom, B; Moon, JH; Lee, SW; Cho, J or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

In 2020 POLYMER published article about SYNDIOTACTIC POLYSTYRENE; GAS SORPTION; POLY(2,6-DIMETHYL-1,4-PHENYLENE OXIDE); AMORPHOUS PHASES; SINGLE-CRYSTALS; X-RAY; TRANSPORT; FILMS; MEMBRANES; DELTA in [Guerra, Gaetano] Univ Salerno, Dipartimento Chim & Biol, Via Giovanni Paolo II 132, I-84084 Fisciano, Italy; Univ Salerno, INSTM Res Unit, Via Giovanni Paolo II 132, I-84084 Fisciano, Italy in 2020, Cited 49. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4. Application In Synthesis of Benzyl ether

The stability of a and beta nanoporous-crystalline (NC) forms of Poly(2,6-dimethyl-1,4-phenylene) oxide (PPO), in the presence of guest molecules leading to crystallization in a and beta-form (alpha and beta-guests), is explored. Sorption of liquid guests at 30 degrees C and 60 degrees C is studied both for NC films and NC aerogels. WAXD and FTIR characterizations show that, for all considered conditions, NC alpha-phases after guest sorption/desorption remain unaltered. NC beta-phases, on the contrary, after alpha-guest sorption can be transformed in co-crystalline (CC) alpha-phases that after guest desorption are transformed in NC alpha-phases. All conducted experiments also show that possible planar orientations of NC films (c//or c perpendicular to orientations) remain essentially unaltered, after sorption of all considered guest molecules. The presently discovered beta ->alpha transition constitutes a route to obtain unoriented alpha-form films, which till now were not available by known preparation procedures.

Application In Synthesis of Benzyl ether. About Benzyl ether, If you have any questions, you can contact Nagendra, B; Cozzolino, A; Golla, M; Daniel, C; Rizzo, P; Guerra, G or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

I found the field of Polymer Science very interesting. Saw the article Two Nanoporous Crystalline Forms of Poly(2,6-dimethyl-1,4-phenylene)oxide and Related Co-Crystalline Forms published in 2019. Computed Properties of C14H14O, Reprint Addresses Rizzo, P (corresponding author), Univ Salerno, Dipartimento Chim & Biol, Via Ponte Don Melillo, I-84084 Fisciano, Italy.; Rizzo, P (corresponding author), Univ Salerno, INSTM Res Unit, Via Ponte Don Melillo, I-84084 Fisciano, Italy.. The CAS is 103-50-4. Through research, I have a further understanding and discovery of Benzyl ether

Extensive characterizations, mainly by wide-angle X-ray diffraction (WAXD) and Fourier transform infrared (FTIR) techniques, are reported for co-crystalline (CC) poly(2,6-dimethyl-1,4-phenylene)-oxide (PPO) films with many different low-molecular-mass guest molecules. These characterizations are also reported for the corresponding nanoporous crystalline (NC) phases, as obtained by suitable guest-removal procedures. Two well-separated NC forms, hereafter named alpha and beta, are obtained by guest removal from two well-separated groups of CC forms. alpha and beta NC forms can be easily recognized by reflections in WAXD patterns as well as by suitable FTIR crystalline peaks. Density and degree of crystallinity measurements confirm that both NC phases exhibit a density definitely smaller than for the amorphous phase (rho(am) = 1.04 g/cm(3) rho(beta) = 0.95 g/cm(3) > rho(alpha) = 0.93 g/cm(3)). Density functional theory calculations combined with geometrical analysis on PPO model systems indicate conformations suitable to fit the observed chain periodicities of the two crystalline forms (c = 5.28 and 5.47 angstrom, for alpha and beta NC forms, respectively).

About Benzyl ether, If you have any questions, you can contact Nagendra, B; Cozzolino, A; Daniel, C; Rizzo, P; Guerra, G; Auriemma, F; De Rosa, C; D’Alterio, MC; Tarallo, O; Nuzzo, A or concate me.. Computed Properties of C14H14O

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Jiang, HB; Xu, XC; Zhang, R; Zhang, Y; Chen, J; Yang, FL in [Jiang, Hongbin; Xu, Xiaochen; Zhang, Rao; Zhang, Yun; Chen, Jie; Yang, Fenglin] Dalian Univ Technol, Key Lab Ind Ecol & Environm Engn, Minist Educ, Sch Environm Sci & Technol, Linggong Rd 2, Dalian 116024, Peoples R China published Nano ferrites (AFe(2)O(4), A = Zn, Co, Mn, Cu) as efficient catalysts for catalytic ozonation of toluene in 2020, Cited 45. COA of Formula: C14H14O. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4.

Nano ferrites (AFe(2)O(4), A = Zn, Co, Mn, Cu) were supported on the surface of gamma-Al2O3 support by hydrothermal synthesis to prepare a series of novel composite catalysts (AFe(2)O(4)/gamma-Al2O3) for catalytic ozonation for elimination of high concentration toluene at ambient temperature. The characterization results showed that the high-purity nano-AFe(2)O(4) particles were uniformly loaded on mesoporous gamma-Al2O3. Further, it was confirmed that among the several catalysts prepared, the amount of oxygen vacancies (O-vs), Lewis acid sites (LAS), and BrOnsted acid sites (BAS) of the ZnFe2O4/gamma-Al2O3 catalyst were the highest. This meant that the ZnFe2O4/gamma-Al2O3 catalyst had a strong adsorption capacity for toluene and ozone (O-3), and had a strong catalytic activity. When the temperature was 293 K and the space velocity was 1500 h(-1), the mol ratio of O-3 to toluene was 6, the degradation rate of toluene (600 mg m(-3)) can reach an optimum of 99.8%. The results of electron paramagnetic resonance (EPR) and Fourier infrared (FT-IR) proved superoxide radicals and hydroxyl radicals by catalytic ozonation. Moreover, the GC-MS analysis results indicated that the toluene degradation began with the oxidation of methyl groups on the benzene ring, eventually producing CO2 and H2O. After repeated experiments, the toluene degradation rate remained stable, and the residual content of O-3 in each litre of produced gas was less than 1 mg L-1, thereby indicating that the ZnFe2O4/gamma-Al2O3 catalyst had excellent reusability and showed great potential for the treatment of toluene waste gas.

COA of Formula: C14H14O. About Benzyl ether, If you have any questions, you can contact Jiang, HB; Xu, XC; Zhang, R; Zhang, Y; Chen, J; Yang, FL or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Recently I am researching about IRON-OXIDE NANOPARTICLES; SHAPE; NANOCUBES; NANORODS; FLOW, Saw an article supported by the Research Council of NorwayResearch Council of Norway [197411/V30]; RFBRRussian Foundation for Basic Research (RFBR) [20-37-70007]. Published in ROYAL SOC CHEMISTRY in CAMBRIDGE ,Authors: Singh, G; Myasnichenko, VS; Glomm, WR. The CAS is 103-50-4. Through research, I have a further understanding and discovery of Benzyl ether. SDS of cas: 103-50-4

Synthesis of size-controlled anisotropic magnetite (Fe3O4) nanoparticles allows designing next-generation magnetic nanosystems with predetermined magnetic properties suited for particular applications in the biomedical, information, and environment fields. In this work, we report a reproducible and economical approach for fabricating anisotropic Fe3O4 nanoparticles via the thermal decomposition method. Controlling the reaction environment, i.e. the degassing pressure, is essential to obtain the reproducible synthesis of anisotropic Fe3O4 nanoparticles along with monodispersity in the size and shape. At low degassing pressure, Fe3O4 nanocubes are formed, and an increase in degassing pressure leads to the formation of Fe3O4 octahedral nanoparticles. To achieve good reproducibility (with respect to size and shape) between different batches, our finding reveals the importance of maintaing the same degassing pressure. The size of the anisotropic Fe3O4 nanoparticles can be varied by changing the heating rate and the solvent amount. The amount of solvent has also an influence on the shape of the nanoparticles, and Fe3O4 nanoparticles of flower morphology are obtained at a high solvent amount. The work also provides new conceptual fundamental insights into understanding the growth mechanism of anisotropic Fe3O4 nanoparticles and thus advancing the field of materials chemistry for rationally designing anisotropic nanoparticles with tunable magnetic properties.

SDS of cas: 103-50-4. About Benzyl ether, If you have any questions, you can contact Singh, G; Myasnichenko, VS; Glomm, WR or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Authors Yu, J; Nap, RJ; Szleifer, I; Wong, JY in AMER CHEMICAL SOC published article about SULFONATED COPOLYMERS; SIZE; TEMPERATURES; STABILITY; BRINE in [Yu, Jin; Wong, Joyce Y.] Boston Univ, Div Mat Sci & Engn, Boston, MA 02215 USA; [Nap, Rikkert J.; Szleifer, Igal] Northwestern Univ, Dept Biomed Engn, Evanston, IL 60208 USA; [Nap, Rikkert J.; Szleifer, Igal] Northwestern Univ, Chem Life Proc Inst, Evanston, IL 60208 USA; [Wong, Joyce Y.] Boston Univ, Dept Biomed Engn, Boston, MA 02215 USA in 2019, Cited 23. Recommanded Product: 103-50-4. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4

Superparamagnetic nanoparticles (SPIONs) can be used as nuclear magnetic resonance (NMR) signal enhancement agents for petroleum exploration. This enhancement effect is uniform if SPIONs are monodisperse in size and in composition; yet it is challenging to synthesize mono disperse particles that do not aggregate in high salinity petroleum brine. Here, we report a method to synthesize individual SPIONs coated with tunable surface coating densities of poly(2-acrylamido-2-methyl-1-propanesulfonic acid (pAMPS) with a catechol end-group (pAMPS*). To establish parameters under which pAMPS*-coated SPIONS do not aggregate, we compared computational predictions with experimental results for variations in pAMPS* chain length and surface coverage. Using this combined theoretical and experimental approach, we show that singly dispersed SPIONs remained stabilized in petroleum brine for up to 75 h with high surface density pAMPS*.

Recommanded Product: 103-50-4. About Benzyl ether, If you have any questions, you can contact Yu, J; Nap, RJ; Szleifer, I; Wong, JY or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Authors Alasiri, H; Klein, MT in AMER CHEMICAL SOC published article about COSMO-RS; PROBE in [Alasiri, Hassan] King Fahd Univ Petr & Minerals, Chem Engn Dept, Dhahran 31261, Saudi Arabia; [Alasiri, Hassan; Klein, Michael T.] King Fahd Univ Petr & Minerals, Ctr Refining & Petrochem, Dhahran 31261, Saudi Arabia; [Klein, Michael T.] Univ Delaware, Dept Chem & Biomol Engn, Newark, DE 19716 USA in 2019, Cited 21. Name: Benzyl ether. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4

The kinetics of the hydrolysis of heavy hydrocarbons in supercritical water were probed using density function theory (DFT) and molecular dynamics (MD) simulation of the probe molecule dibenzyl ether (DBE). The focus of the study was the effect of solvent on the reaction kinetics. The DFT studies were aimed at the estimation of the kinetic parameters and the transition-state structure, whereas the MD studies were aimed at the estimation of the solubility parameters used in a model of the reaction nonidealities. Both DFT results, with an imposed dielectric constant to represent the solvent polarity, and the MD results, where the solubility parameter was estimated, indicated that the fastest kinetics were attained at the highest polarity. The COSMO-sigma profiles obtained from DFT calculations revealed that the transition state for the reaction was more polar than the reactants. The MD simulation provided estimates of the solubility parameters of reactants and the transition state, which allowed a complementary estimate of the rate of the reaction in a supercritical water solution via transition-state theory. The rates of reaction estimated from DFT and MD calculations at 674 K were in fair agreement with experimental data at low values of the dielectric constant.

Name: Benzyl ether. About Benzyl ether, If you have any questions, you can contact Alasiri, H; Klein, MT or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

I found the field of Polymer Science very interesting. Saw the article Planar Orientation and Transparency of Nanoporous-Crystalline Polymer Films published in 2021. Formula: C14H14O, Reprint Addresses Guerra, G (corresponding author), Univ Salerno, Dipartimento Chim & Biol, INSTM Res Unit, I-84084 Fisciano, SA, Italy.. The CAS is 103-50-4. Through research, I have a further understanding and discovery of Benzyl ether

The dependence of polymer film transparency on different kinds of planar orientations of nanoporous-crystalline (NC) phases of syndiotactic polystyrene (sPS) and poly(2,6-dimethyl-1,4-phenylene)oxide (PPO) is described. The two polymers exhibit opposite behavior: film transparency is improved for sPS and PPO by orientations of the chain axes of the NC phases being parallel (c(parallel to)) and perpendicular (c(perpendicular to)) to the film plane, respectively. This behavior can be rationalized by the negative and positive birefringence of sPS and PPO chains, respectively. In fact, to maximize transparency, the refractive index of the NC phase along the perpendicular to the film plane has to be increased to come closer to that of the corresponding amorphous phase. This can be pursued by controlling the orientation of the NC phases and hence of the associated refractive index ellipsoids.

Formula: C14H14O. About Benzyl ether, If you have any questions, you can contact Nagendra, B; Rizzo, P; Daniel, C; Guerra, G or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem