Month: September 2021

Adding a certain compound to certain chemical reactions, such as: 5414-19-7, name is 1-Bromo-2-(2-bromoethoxy)ethane, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 5414-19-7, SDS of cas: 5414-19-7

General procedure: 1,3-Dibromopropane (2.2 Kg, 10.9 mol) was slowly added to a stirred suspension of 264 g magnesium turnings (11 mol)In tetrahydrofuran (17.6 L).Control the dropping rate to maintain the reaction temperature at minus 40 ~ 50 degrees Celsius.After the addition is complete, the mixture is precooled to minus 50 degrees Celsius for two hours at minus 40 to 50 degrees Celsius,And the reaction mixture prepared from 2-chloropyridine was added.Control the dropping rate to maintain the reaction temperature at minus 40 ~ 50 degrees Celsius.After the addition was completed, the temperature was slowly raised to 60 C and stirred for 3 hours.The reaction mixture was concentrated under reduced pressure to 20 liters of n-hexane (20 L).The resulting solid was removed by filtration.Concentration of the filtrate followed by pressure distillation gave the desired target intermediate (1.16 Kg, 62%) as a colorless liquid.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Zhejiang Xingyue Pharmaceutical Technology Co., Ltd.; Ying Lv; Chen Qingquan; Hu Junbin; (103 pag.)CN104177394; (2017); B;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 6358-77-6, A common heterocyclic compound, 6358-77-6, name is 5-Bromo-2-methoxyaniline, molecular formula is C7H8BrNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Preparation of (±)-12: A pressure glass tube charged with trifluoroborate (±)-10 (31 mg, 0.10 mmol), Cs2CO3 (98 mg, 0.30 mmol) and PdCl2(dppf)·CH2Cl2 (4 mg, 5 mol %) was alternatively evacuated and sparged with argon three times. A solution of 4-bromoanisol (21 mg, 0.11 mol) in toluene (1.5 mL) previously flushed with argon, then water (0.5 mL) were added by syringes. The reaction mixture was stirred at 100 C for 18 h and then cooled to room temperature. Water (5 mL) was added and the mixture extracted with EtOAc (5 mL × 2). The combined organic layers were washed with water (5 mL × 2), dried (MgSO4) and concentrated in vacuo. The residue was purified by column chromatography (cyclohexane/EtOAc 9:1), affording 12 as a colorless oil (24 mg, 75%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Ty, Nancy; Pontikis, Renee; Chabot, Guy G.; Devillers, Emmanuelle; Quentin, Lionel; Bourg, Stephane; Florent, Jean-Claude; Bioorganic and Medicinal Chemistry; vol. 21; 5; (2013); p. 1357 – 1366;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 14227-17-9, name is 2,4,6-Trimethoxyaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C9H13NO3

Intermediate 4 (100 mg) was added to 3 MI of POCl3 at 0 C. 2,4, 6- TNMETHOXYBENZENAMINE (0.13 g) was added and the reaction mixture was stirred for 3 to 5 days. The ice bath was allowed to melt during the first couple of hours. After that, the POC13 suspension was dropped to 200 ml of vigorously stirred diisopropyl ether. The solid material was filtered off and washed with diisopropyl ether. The residue was immediately stirred in ETOAC/SATURATED aqueous NAHCO3 (1/1) (200 ML) for 1 hour. The EtOAc was dried using brine and NA2SO4 successively and evaporated. The residue was purified by preparative TLC using CH2CI2/MEOH (95/5) as the eluent or by precipitation in CH2CLZ/MEOH. Yield: 0.01 g of compound 36 (8%).

The synthetic route of 2,4,6-Trimethoxyaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN PHARMACEUTICA N.V.; ARTS, Theodora, Joanna, Francisca; JANSSEN, Graziella, Maria, Constantina; JANSSEN, Herwig, Josephus, Margareta; JANSSEN, Jasmine, Josee, Werner; JANSSEN, Paul, Peter, Maria; JANSSEN, Maroussia, Godelieve, Frank; WO2004/74266; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 1535-75-7, These common heterocyclic compound, 1535-75-7, name is 2-(Trifluoromethoxy)aniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Acetamides (1a-1x, 1ab, 1ac and 1ba-1bc). To a solution of 2-phenylacetic acid (7.0mmol), 2-(trifluoromethoxy)aniline (7.7mmol) in anhydrous CH2Cl2 (25mL) were added EDCI (1.745g, 9.1mmol) and DMAP (256.6mg, 2.1mmol). The reaction mixture was stirred at room temperature overnight, diluted with HCl (1M) aqueous solution, and extracted with CH2Cl2 (3×25mL). The combined organic phase was washed with saturated NaHCO3 aqueous solution and brine, dried over anhydrous Na2SO4, and concentrated under vacuum. Purification by flash chromatography (Silica gel, petroleum ether: ethyl acetate=50: 1 as eluent) gave the corresponding 2-phenyl-N-[2-(trifluoromethoxy)phenyl]acetamide compound.

The synthetic route of 1535-75-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zhao, Xiao-Jing; Zhao, Jie; Sun, Xin; Liu, Ji-Kai; Wu, Bin; Tetrahedron; vol. 73; 25; (2017); p. 3463 – 3477;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4316-51-2, name is 4-Methoxytriphenylamine, This compound has unique chemical properties. The synthetic route is as follows., Formula: C19H17NO

POCl3 (6 mL, 64.17 mmol) was carefully added to a solution of 4-methoxy-N,N-diphenylaniline (10 g, 36.32 mmol), DMF (5 mL, 64.85 mmol) and 50 mL of 1,2-dichloroethane. The mixture was refluxed for 4 h, then cooled to room temperature (r.t.), and poured into a saturated aqueous sodium acetate solution (100 mL). The product was extracted with dichloromethane. The organic layer was dried over anhydrous MgSO4. The solvent was evaporated by a rotary evaporator. The residue was purified by silica gel column chromatography using ethyl acetate: n-hexane (2:3) to give (1) (7.6 g, Yield: 69%). TOF/MS (ESI): found 326.1 (M+Na+). 1H NMR (300 MHz, CDCl3, delta): 9.79 (s, 1H, ArCHO), 7.68-6.89 (m, 14H, ArH), 3.83 (s, 3H, ArOCH3).

According to the analysis of related databases, 4316-51-2, the application of this compound in the production field has become more and more popular.

Reference:
Article; Giang, Ha Ngoc; Kinashi, Kenji; Sakai, Wataru; Tsutsumi, Naoto; Journal of Photochemistry and Photobiology A: Chemistry; vol. 291; (2014); p. 26 – 33;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 929-75-9,Some common heterocyclic compound, 929-75-9, name is 1,11-Diamino-3,6,9-trioxaundecane, molecular formula is C8H20N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 0.41 mmol of polyethylene glycol diamine,DIPEA105 mg, 4-fluoro-2- (2,6-dioxopiperidin-3-yl) ethindol-1,3-one,Add DMF 2mL, 90 C for 12 h. Cool to room temperature,Add water 20mL, ethyl acetate extraction,The extract is saturated with saline,Dried over anhydrous magnesium sulfate,Evaporated under reduced pressure,Silica gel column chromatography (methanol: dichloromethane 1; 10)Intermediate 7.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,11-Diamino-3,6,9-trioxaundecane, its application will become more common.

Reference:
Patent; Jilin University; Lu Haibin; Wang Shihui; Li Haiyan; Wang Chunhe; Deng Jiayu; Feng Mingming; Guo Yu; Su Runping; Jin Xiangqun; (26 pag.)CN106543185; (2017); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2398-37-0, name is 1-Bromo-3-methoxybenzene, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 1-Bromo-3-methoxybenzene

Acetyl chloride (3.56 mL, 0.06 mol) is added dropwise to a stirred suspension of 3-bromoanisole (9.35 g, 0.05 mol) and AlCl3 (8.00 g, 0.06 mol) in dichloromethane (50 mL) at 0 C under argon. The resulting mixture is stirred at 0 0C for 40 min and then at room temperature for 1 h, and diluted with H2O (100 mL) and 2 N HCl (35 mL), and extracted with ethyl acetate (2 x 100 mL and 50 mL). The extract is washed (brine) and dried. After solvent removal at reduced pressure, the residue is purified on silica gel (12.5% to 14.3% ethyl acetate/hexane) to give 9.55 g (83%) of 2 as a colorless liquid. IR 2964, 1688, 1596, 1252 cm”1; 1H NMR (CDCI3) delta 2.66 (s, 3H, CH3CO), 3.88 (s, 3H, CH3O), 6.91 (dd, J= 8.4 Hz, 2.4 Hz, IH, 5-PhH), 7.19 (d, J= 2.4 Hz, IH, 3- PhH), 7.63 ppm (d, J= 8.4 Hz, IH, 6-PhH).

According to the analysis of related databases, 2398-37-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BURNHAM INSTITUTE FOR MEDICAL RESEARCH; MERCOLA, Mark; DAWSON, Marcia, I.; CASHMAN, John; WO2010/33643; (2010); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 41864-45-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 41864-45-3, name is 4,5-Dimethoxy-2-methylaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

The compound 66 (830 mg, 2.75 mmol) was dissolved in acetic acid (6.64 mL). 4,5-dimethoxy-2-methylaniline (2.30 g, 13.7 mmol) was added to the solution. The mixture was stirred at 100C for 3 hours. Water was added to the reaction mixture. The mixture was extracted with ethyl acetate. The organic layer was washed by brine, and dried over sodium sulfate. The solvent was evaporated under reduced pressure. The obtained residue was solidified with ethyl acetate to give the compound I-1281 (450 mg, yield 40%). 1H-NMR (DMSO-D6) delta: 1.90 (s, 3H), 3.70 (s, 3H), 3.75 (s, 3H), 5.33 (s, 2H), 6.75 (s, 1H), 6.83 (s, 1H), 7.33 (dd, J = 8.0 Hz, 2H), 7.40 (s, 1H), 8.83 (s, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4,5-Dimethoxy-2-methylaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Shionogi & Co., Ltd; TANAKA, Satoru; OGAWA, Tomoyuki; KAI, Hiroyuki; OGATA, Yuki; HIRAI, Keiichiro; KUROSE, Noriyuki; FUJII, Yasuhiko; (438 pag.)EP3287443; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 51388-20-6, name is 4-(Benzyloxy)aniline hydrochloride, A new synthetic method of this compound is introduced below., Application In Synthesis of 4-(Benzyloxy)aniline hydrochloride

A solution of 4-benzyloxyaniline hydrochloride (4.0 g, 17.0 mmol), methanesulfonylacetic acid (2.35 g, 17.0 mmol) and HBTU (6.89 g, 18.2 mmol) in DMF (70 mL) was stirred at ambient temperature one minute. DIEA (6.5 mL, 37.2 mmol) was added all at once, and the resultant solution was stirred at ambient temperature. The solution was poured into water, and the product crystallized. The product, 5.4 g (99%), was collected by filtration and was used without any further purification in the subsequent reaction. MS m/z 320 (MH+). 1H NMR(DMSO-d6) delta 3.17 (s, 3H), 4.25 (s, 2H), 5.07 (s, 2H), 7.00 (d, 2H), 7.32-7.55 (m, 7H) and 10.32 (s, 1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Carson, John R.; McNally, James J.; US2005/182108; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

588-96-5, name is p-Bromophenetole, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Quality Control of p-Bromophenetole

Preparation Example 3 Synthesis of 1-bromo-3-(4-ethoxybenzyl)benzene; A 2.6 M n-butylithium hexane solution (5.8 mL) was added to a mixture of 4-bromophenetole (2.87 g, 0.0143 mol) and tetrahydrofuran (30 mL) at -78C. After the mixture was stirred for 0.5 hours, a tetrahydrofuran (15 mL) solution of 3-bromobenzaldehyde (2.65 g, 0.0143 mol) was added, and further stirred for 15 minutes to warm the reaction mixture to room temperature. After the reaction mixture was added with a saturated ammonium chloride aqueous solution and extracted with ethyl acetate, the organic layer was washed with brine and dried with anhydrous magnesium sulfate. After the desiccant was filtered off, the residue obtained by evaporating the solvent under reduced pressure was purified by silica gel column chromatography (hexane:ethyl acetate=7:1 to 5:1) to obtain colorless oily (3-bromophenyl)(4-ethoxyphenyl)methanol (3.94 g, 90%). Then, Et3SiH (4.09 mL, 0.0256 mol) and BF3·Et2O (1.47 mL, 0.0116 mol) were added sequentially to a chloroform (22 mL) solution of (3-bromophenyl)(4-ethoxyphenyl)methanol (3.92 g, 0.0128 mol) at -60C. After stirred for one hour, the reaction solution was warmed to room temperature. After the reaction mixture was added with a saturated sodium carbonate aqueous solution and extracted with chloroform, the organic layer was washed with brine and dried with anhydrous magnesium sulfate. After the desiccant was filtered off, the residue obtained by evaporating the solvent under reduced pressure was purified by silica gel column chromatography (hexane:ethyl acetate=50:1) to obtain a colorless oily title compound (2.84 g, 76%). 1H NMR (300 MHz, CHLOROFORM-d) delta ppm 1.40 (t, J=7.0 Hz, 3 H) 3.88 (s, 2 H) 4.01 (q, J=7.0 Hz, 2 H) 6.83 (d, J=8.9 Hz, 2 H) 7.07 (d, J=8.9 Hz, 2 H) 7.09 – 7.18 (m, 2 H) 7.29 – 7.34 (m, 2 H).

The synthetic route of 588-96-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TAISHO PHARMACEUTICAL CO., LTD; EP1845095; (2007); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem