Month: June 2021

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 27060-75-9, name is 1-Bromo-4-methoxy-2-methylbenzene, A new synthetic method of this compound is introduced below., Recommanded Product: 27060-75-9

In a four-necked flask equipped with a thermometer, reflux condenser, stirrer, and nitrogen introduction tube,Add 200g of N-methylpyrrolidone and 15.0g (0.11mol) of acetanilide, stir to dissolve acetanilide in N-methylpyrrolidonein.Add 22g (0.12mol) of 30wt% sodium methoxide and gradually heat to 100 C to distill off methanol to prepare acetanilide sodium salt solution.Add 20.2 g (0.1 mol) 4-bromo-3-methylanisole to the reaction bottle at 20 C for 30 minutes,Control the temperature of the material ? 40 , after the addition is complete, continue to stir the reaction at 40 for 45 minutes.15g of methanol was added, and the temperature was raised to 100 C within 30 minutes, and the low-boiling fraction was distilled off. Then, the reaction was continued at 100 C for 30 minutes.Finally, under vacuum conditions, the temperature is controlled within the range of 110-130 C, and N-methylpyrrolidone is distilled off,A reaction mixture containing the target product 4-methoxy-2-methyldiphenylamine was obtained. Add 200 g of water to the reaction mixture containing 4-methoxy-2-methyldiphenylamine and stir well,Dissolve soluble materials and filter to obtain crude 4-methoxy-2-methyldiphenylamine.The crude 4-methoxy-2-methyldiphenylamine is post-treated by methanol recrystallization, centrifugal separation, drying, etc.Obtained target product 4-methoxy-2-methyldiphenylamine 20.5g, purity 99.3%(Gas chromatography analysis),The reaction yield was 95.3% (based on 4-bromo-3-methylanisole).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Shandong Dao Ke Chemical Co., Ltd.; Shandong Morui Technology Co., Ltd.; Li Mingxin; Lu Fengyang; Wang Jiahui; Yang Shuren; Li Mingjing; Yan Xue; (13 pag.)CN104628585; (2016); B;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 35822-58-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 35822-58-3 as follows.

General procedure: One equiv. of protected hydrazine was dissolved/suspended in EtOH containing 10% water (approx. 5 ml per 1 mmol of protected hydrazine), 1.05 eq of benzaldehyde acetal was added, followed by the addition of 0.05 equiv. of TsOH in an ethanolic solution (10 mg of TsOH per 0.5 ml of EtOH). The obtained reaction mixture was refluxed and monitored by TLC (silica gel) until full conversion of the starting material was observed. Ethyl acetate/light petroleum mixtures or pure ethyl acetate were used as TLC eluents. After completion of the reaction the solvent was removed under reduced pressure, approx. 15 ml of toluene was added to the residue and the solvent was again removed under reduced pressure. The obtained crude hydrazone was dissolved in commercial stabilized THF (approx. 4 ml per 1mmol of hydrazone), the flask was flushed with argon and 3 equiv. of 1M BH3-THF complex was added at room temperature, followed by 3 hours of stirring. The progress of the reaction was checked by TLC and if some unreacted hydrazone was left, stirring was continued for an additional 45 min. After thefull conversion of hydrazone EtOH (10 ml) was added to the reaction mixture (Caution: Liberation of hydrogen) and the obtained mixture was refluxed for 1 hour. After cooling to room temperature the solvent was removed under reduced pressure and the residue was dissolved in ethyl acetate, washed with saturated NaHCO3 solution, water and saturated NaCl solution. The aqueous phase was extracted twice with ethyl acetate, the extracts were washed with saturated NaCl solution, combined with the organic phase, dried over anhydrous Na2SO4 and evaporated to dryness. The residue was purified by column chromatography on silica gel by using ethyl acetate/light petroleum 1:1 or 1:2 mixtures or pure ethyl acetate as eluent. For the exact information about the eluent used for monitoring reaction progress and chromatographic purifications, see the Rf value for each compound.

According to the analysis of related databases, 35822-58-3, the application of this compound in the production field has become more and more popular.

Reference:
Article; Mastitski, Anton; Niinepuu, Siret; Haljasorg, Toiv; Jaerv, Jaak; Organic Preparations and Procedures International; vol. 50; 4; (2018); p. 416 – 423;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 261762-35-0, name is 5-Bromo-1,2-difluoro-3-methoxybenzene, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 261762-35-0, Quality Control of 5-Bromo-1,2-difluoro-3-methoxybenzene

To a mixture of 6-methoxy-1,2,3,4-tetrahydro-2,7-naphthyridine (500 mg, 3.04 mmol) and 5-bromo-2,3-difluoroanisole (883 mg, 3.96 mmol) in dioxane (8 mL) was added t-BuONa (438 mg, 4.56 mmol), Pd2(dba)3 (40 mg, 0.04 mmol) and Ruphos (30 mg, 0.06 mmol) under N2. After being heated with stirring at 100 C for 12 hrs, the resulting reaction mixture was filtered. Thefiltrate was concentrated in vacuo, diluted with DCM (100 mL), washed with water (30 mL) and brine (30 mL), dried over anhydrous Na2SO4 and concentrated in vacuo. The residue was purified by flash column to give 2- (3 ,4-difluoro-5-methoxy-phenyl)-6-methoxy-3 ,4-dihydro- 1H- 2,7-naphthyridine (560 mg) as a gray solid.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHENG, Zhanling; WANG, Min; YANG, Song; (208 pag.)WO2016/107832; (2016); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

910251-11-5, name is Potassium trifluoro(methoxymethyl)borate, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of Potassium trifluoro(methoxymethyl)borate

Under an argon atmosphere a mixture of 70 mg of tert-butyl 10-bromo-8-cyclopropyl-3,4,7,8-tetrahydro-1H-[1,4]diazepino[6,7,1-ij]quinoline-2(6H)-carboxylate (0.172 mmol, 1.00 eq) from step 8.2, 52.2 mg of potassium trifluoro (2-methoxymethyl)borate (0.344 mmol, 2.00 eq), 168 mg of cesium carbonate (0.516 mmol, 3.00 eq), 1.43 mg of Pd(OAc)2 (0.006 mmol, 0.04 eq) and 5.73 mg of X-Phos (0.012 mmol, 0.07 eq) in degassed dioxane (4 mL) and water (0.5 mL) was heated in a microwave at 130 C. for 40 h. Then the mixture was extracted with DCM and the organic phase was washed with water and dried over MgSO4, filtrated and solvent was evaporated to yield the title compound. ESI-MS: m/z (%): 373.30 (100, [M+H]+).

The synthetic route of 910251-11-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AbbVie Deutschland GmbH & Co. KG; BACKFISCH, Gisela; BAKKER, Margaretha Henrica Maria; BLAICH, Guenter; BRAJE, Wilfried; DRESCHER, Karla; ERHARD, Thomas; HAUPT, Andreas; KOOLMAN, Hannes; LAKICS, Viktor; LINSENMEIER, Anna; MACK, Helmut; PETER, Raimund; RELO, Ana Lucia; US2015/259343; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 2688-84-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2688-84-8, name is 2-Phenoxyaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

1L into a round bottom flask 2-phenoxyaniline (25.0, 0.135mol) and hydrochloric acid, 30ml, 150ml water, cooled to 0 degrees and the mixture was stirred for 1 hour. After the addition the reaction mixture of sodium (11.2g, 0.162mol) in 75ml aqueous solution of the same temperature and the mixture was stirred for one hour. Potassium iodide (44.8g, 0.270mol) and note the temperature of the reaction solution was added dropwise not exceed 5 was added dropwise to 75ml of an aqueous solution. Stirred for 5 hours at room temperature after the completion of the reaction haejugo After washing with sodium sayi oh sulfate aqueous solution was extracted with ethyl acetate and water. The organic layer was separated and concentrated under reduced pressure and purified by column chromatography to obtain a intermediate 5-a> (22.6g, 56.5%)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Phenoxyaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SFC CO LTD; PARK, SEOK BAE; SONG, JU MAN; LEE, YUR IM; KIM, HEE DAE; PARK, SANG WOO; JEONG, KYUNG SEOK; CHA, SOON WOOK; (96 pag.)KR2015/130206; (2015); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Some common heterocyclic compound, 22094-18-4, name is 1,3-Dibromo-2,2-dimethoxypropane, molecular formula is C5H10Br2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 22094-18-4

To a suspension of NaH (4.1 g, 100 mmol) (60% in mineral oil) in DMF (100 mL) was added 2-(4-bromophenyl)acetonitrile (10 g, 51 mmol) followed by l,3-dibromo-2,2-dimethoxypropane (11 g, 42 mmol). The reaction mixture was heated to 60 C for 12 h. After 12 h the reaction mixture was diluted with water (1000 mL) and washed with EtOAc (400 mLx2). The combined organics were washed with brine (100 mL), dried over anhydrous Na2SC>4, and concentrated under reduced pressure. The residue was purified by flash chromatography on silica (petroleum ether : EtOAc = 50: 1 to 20: 1) to afford 1-(4-bromophenyl)-3,3-dimethoxycyclobutanecarbonitrile. MS (ESI) Calc’d [M+H]+, 296; found, 296.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 22094-18-4, its application will become more common.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MCGOWAN, Meredeth Ann; ACHAB, Abdelghani; FRADERA, Xavier; HAN, Yongxin; LI, Derun; LIM, Jongwon; LIU, Kun; SCIAMMETTA, Nunzio; WHITE, Catherine, M.; YU, Wensheng; ZHANG, Hongjun; ZHOU, Hua; (109 pag.)WO2019/74747; (2019); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3616-56-6, name is 2,2-Diethoxy-N,N-dimethylethanamine, A new synthetic method of this compound is introduced below., Quality Control of 2,2-Diethoxy-N,N-dimethylethanamine

Example 2 (E)-4-Dimethylamino-But-2-Enoic acid-[4-(3-Chloro-4-Fluoro-Phenylamino)-7-((S)-Tetrahydrofuran-3-Yloxy)-Quinazolin-6yl]-Amide 5.6 litres of 30percent hydrochloric acid (53.17 mol) are added to 4.4 litres of water. Then 4.28 kg of 95percent (dimethylamino)-acetaldehyde-diethylacetal (26.59 mol) are added dropwise within 20 minutes at 30° C. The reaction solution is stirred for 8 hours at 35° C. stirred, cooled to 5° C. and stored under argon. This solution is referred to as solution B. 4.55 kg (68.06 mol) of potassium hydroxide are dissolved in 23.5 litres of water and cooled to -5° C. This solution is referred to as solution C. 5.88 kg (10.63 mol) of diethyl ((4-(3-chloro-4-fluoro-phenylamino)-7-(tetrahydrofuran-3-yloxy)-quinazoline-6-ylcarbamoyl)-methyl)-phosphonate and 0.45 kg of lithium chloride (10.63 mol) are placed in 23.5 litres of tetrahydrofuran and cooled to -7° C. The cold solution C is added within 10 minutes. Then solution B is added at -7° C. within 1 hour. After stirring for a further hour at -5° C. the reaction mixture is heated to 30° C. and combined with 15 litres of water. After cooling to 3° C. the suspension is suction filtered, the precipitate is washed with water and dried. Yield: 5.21 kg of crude product, 100percent, water content: 6.7percent The crystallisation of the crude product is carried out with butyl acetate/methylcyclohexane Yield: 78percent purity HPLC 99.4Fl percent, water content 5.4percent

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Boehringer Ingelheim International GmbH; US2005/85495; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 645-36-3, A common heterocyclic compound, 645-36-3, name is 2,2-Diethoxyethanamine, molecular formula is C6H15NO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In the three-necked flask has been added9.94 g of aminoacetaldehyde diethyl acetal (0.074 mol)20.6 g of S-methylisothiourea sulfate (0. 074 mol) and 16. 5 ml of water, and then warmed to 110 C. After stirring for 1. 5 h, the reaction was stopped. The solvent was distilled off, followed by addition of 13. 0 g of 37% hydrochloric acid (mass percent, the same as in the following examples) to the reaction solution, stirred at 65 C for 1 h, 50 ml of water was added, the solvent was evaporated, 30 ml of acetone was added to precipitate pale yellow crystals The The crude product was recrystallized from 30 ml of ethanol-water,The resulting white powdery solid 2-aminoimidazolyl sulfate 15. 90 g, yield 81. 5%

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Yancheng Institute Of Technology; Zhao, LingLing; Dai, Yong; Qi, gang; (5 pag.)CN103396369; (2016); B;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 22483-09-6, name is 2,2-Dimethoxyethanamine, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 22483-09-6, name: 2,2-Dimethoxyethanamine

To 3-thiophenecarboxaldehyde (8.75 mL) cooled to 0 C. was added aminoacetaldehyde dimethylacetal (14.2 mL). The clear solution was stirred at room temperature for 60 h. The solution was diluted with ethanol and hydrogenated at 56 psi in the presence of 10% Pd/C (5 g) overnight. The catalyst was filtered off and washed with MeOH. The solvent was removed by rotary evaporation and co-evaporated with toluene to afford an oil (19 g, 94% yield).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,2-Dimethoxyethanamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Nagarathnam, Dhanapalan; Khire, Uday; Asgari, Davoud; Shao, Jianxing; Liu, Xiao-Gao; Wang, Chunguang; Hart, Barry; Weber, Olaf; Lynch, Mark; Zhang, Lei; Wang, Lei; US2004/14755; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 458-50-4, name is 4-Bromo-3-fluoroanisole, A new synthetic method of this compound is introduced below., Formula: C7H6BrFO

A mixture of 4-bromo-3-fluoro anisole (2.0 g, 9.75 mmol), methyl 3-methyl-4-(4,4,5,5- tetramethyl-1-3s2-dioxaborolan-2-yl)benzoate (2.8 g, 10.14 mmol), Cs2C03 (6.99 g, 21.46 mmol) and catalytic amount of Pd(PPh3)4 (1.13 g, 0.975 mmol) in dioxane (50 mL) was stirred at 80 °C overnight. The solvent was removed. Water was added. The mixture was extracted with CH2C12 (3 x 20 mL). Washed with brine and dried over Na2SC>4.The residue was purified by column chromatography on silica gel Biotage 40M, eluting with EtOAc/hexane (1:9) to give the title compound as a colorless solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LU, Zhijian; CHEN, Yi-Heng; SMITH, Cameron; LI, Hong; THOMPSON, Christopher, F.; SWEIS, Ramzi; SINCLAIR, Peter; KALLASHI, Florida; HUNT, Julianne; ADAMSON, Samantha, E.; DONG, Guizhen; ONDEYKA, Debra, L.; QIAN, Xiaoxia; SUN, Wanying; VACHAL, Petr; ZHAO, Kake; WO2012/58187; (2012); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem