Month: January 2021

Reference of 74654-07-2, The chemical industry reduces the impact on the environment during synthesis 74654-07-2, name is 2-(2-(2-Methoxyethoxy)ethoxy)ethanamine, I believe this compound will play a more active role in future production and life.

HATU (500 mg, 1.315 mmol) was added to a stirred solution of 3-((4-((tert-butoxycarbonyl)amino)naphthalen-1-yl)oxy)pyridin-2-yl)amino)-5-ethynylbenzoic acid (see Example 52(iii) above; 500 mg, 1.009 mmol), 2-(2-(2-methoxyethoxy)ethoxy)-ethanamine (277 mg, 1.695 mmol) and triethylamine (250 muL, 1.796 mmol) in N,N-dimethylformamide (10 mL). The mixture was stirred at rt for 18 h. The mixture was diluted with EtOAc (50 mL) and washed with water (50 mL), 20% brine (3*50 mL) and saturated brine (50 mL). The organic phase was dried (MgSO4), filtered and concentrated under reduced pressure. The crude product was purified by chromatography on the Companion (40 g column, EtOAc) to afford the sub-title compound (580 mg) as a tan foam. LCMS m/z 641 (M+H)+ (ES+); 639 (M-H)- (ES-)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(2-(2-Methoxyethoxy)ethoxy)ethanamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Topivert Pharma Limited; Respivert Limited; BAKER, Thomas Matthew; FYFE, Matthew Colin Thor; HARBOTTLE, Gareth William; HASIMBEGOVIC, Vedran; MEGHANI, Premji; RIGBY, Aaron; SAMBROOK-SMITH, Colin; THOM, Stephen Malcolm; US2014/296208; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 886762-08-9, The chemical industry reduces the impact on the environment during synthesis 886762-08-9, name is 5-Bromo-2-(trifluoromethoxy)aniline, I believe this compound will play a more active role in future production and life.

General Procedure: Methyl 2-{[4-(chlorosulfonyl)-2,3-dimethylphenyl]oxy}propanoate (7) (4 g, 13.0 mmol) was dissolved in pyridine (10 mL). After 5 min, 3-bromo-2-chloroaniline (3.22 g, 15.6 mmol) was added. The reaction was complete within a few hours. The reaction mixture was then extracted using diethyl ether. The combined organic phases were washed with 1N HCl and brine, dried over sodium sulfate, filtered, and concentrated in vacuo to afford the title compound which was used without further purification.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Bromo-2-(trifluoromethoxy)aniline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Evans, Karen A.; Shearer, Barry G.; Wisnoski, David D.; Shi, Dongchuan; Sparks, Steven M.; Sternbach, Daniel D.; Winegar, Deborah A.; Billin, Andrew N.; Britt, Christy; Way, James M.; Epperly, Andrea H.; Leesnitzer, Lisa M.; Merrihew, Raymond V.; Xu, Robert X.; Lambert, Millard H.; Jin, Jian; Bioorganic and Medicinal Chemistry Letters; vol. 21; 8; (2011); p. 2345 – 2350;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Some common heterocyclic compound, 17061-62-0, name is Bis(4-methoxybenzyl)amine, molecular formula is C16H19NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C16H19NO2

To a cooled (-35 C) solution of 4-Fluoro-3-nitrobenzenesulfonyl chloride (4.89 g, 20.42 mmol) in THF (50 mL) was added Triethylamine (3.13 mL, 22.46 mmol), followed by addition of Bis-(4-methoxybenzyl)amine (4.97 mL, 20.7 mmol) in THF (50 mL) solution over 30 min. while the temperature was kept at -35 C. After completion of the addition, the temperature was allowed slowly to warm to 0 C over 1 h., and the mixture was stirred at 0 C for an additional hour. The mixture was neutralized with 1 N HC1 to pH about 4-5 and diluted with EtOAc (100 mL). The organic layer was separated, washed with 1 N HC1 (10 mL), 7.5% NaHC03 aqueous solution (20 mL), and brine, dried over Na2S04, filtered, and concentrated under reduced pressure. The residue was treated with DCM (30 mL), and hexane was added to the suspension until it became cloudy. The resulting suspension was sonicated for 2 min. and left at r.t. for 1 h. The mixture was filtered and washed with hexane to afford the desired title product (6.85 g) without further purification. The mother liquid was concentrated under reduced pressure. The residue was treated with DCM (5 mL) and hexane was added as the procedures mentioned above to afford the additional 0.51 g of the title product. Total product 4-fluoro-N,N-bis[(4-methoxyphenyl)methyl]-3-nitro-benzenesulfonamide obtained is 7.36 g (78%). NMR (400 MHz, DMSO-de): d 8.18-8.23 (m, 2 H), 7.75-7.79 (q, 1 H), 7.08 (d, 4 H), 6.81 (d, 4 H), 4.31 (s, 4 H), 3.71 (s, 6 H). 19F NMR (376 MHz, DMSO-d6): d -112.54 (s, 1 F). LCMS calculated for C22H22FN2O6S (M+H)+: m/z = 461.11; found: 461.1.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 17061-62-0, its application will become more common.

Reference:
Patent; PRELUDE THERAPEUTICS, INCORPORATED; ZHUO, Jincong; LEAL, Raul; SHETTY, Rupa; LUENGO, Juan; COMBS, Andrew, Paul; (525 pag.)WO2020/97577; (2020); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 115144-40-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 115144-40-6 as follows.

1, 2-Difluoro-4-methoxy-benzene (100mg, 0. 69MMOL) and sodium methan- ethiolate (148mg, 2. 08MMOL) were dissolved in N, N-dimethylformamide (2mL) and the reaction mixture stirred at 60C for 18 hours. Additional sodium METHANETHIOLATE (99mg, 139MMOL) was added and the reaction mixture was heated to 100C for 18 hours. The reaction mixture was diluted with water and extracted with ether (x 2). The ether extracts were washed with water (x 2), dried (MGS04) and then concentrated under reduced pressure. The residue was taken up in a pentane: ether 1: 1 solution (2mL) and filtered through a plug of silica in a pipette, and then washed through with a pentane: ether 1: 1 solution (5mL). The solution was concentrated under reduced pressure to yield the title product as a colourless oil, 135mg. H NMR (CDCI3, 300MHZ) 8 : 2.45 (s, 3H), 3.80 (s, 3H), 6.65 (dd, 1H), 6.80 (DD, 1 H), 6.95 (dd, 1 H).

According to the analysis of related databases, 115144-40-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; PFIZER LIMITED; PFIZER INC.; WO2005/9964; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 645-36-3 as follows. Recommanded Product: 2,2-Diethoxyethanamine

[00231] To a solution of cyanogen bromide (25 g, 236.03 mmol) in hexane (80 mL) was added a solution of the amino-acetaldehyde diethyl acetal (34.3 mL, 236.03 mmol) in diethyl ether (80 mL) at room temperature. The resulting mixture was stuffed overnight. A white solid was formed and was removed by filtration and washed with diethyl ether. The filtrate was concentrated and purified by flash chromatography on silica gel (eluted with 0/100 to 5/95 methanol/dichloromethane) to afford N- (2,2-diethyloxyethyl)carbodiimide (27 g, 72% yield) as a bright yellow oil. Rt (retention time) = 1.82 mm; MS m/z: 159.20 [M+1].

According to the analysis of related databases, 645-36-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; DANA-FARBER CANCER INSTITUTE, INC.; CHOI, Hwan, Geun; LIANG, Yanke; GRAY, Nathanael; (135 pag.)WO2016/14542; (2016); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4003-89-8, name is 7-Methoxy-1,2,3,4-tetrahydronaphthalen-2-amine, A new synthetic method of this compound is introduced below., SDS of cas: 4003-89-8

(a) A solution of 1-[1-(p-toluenesulfonyl)indol-4-yloxy]-2,3-epoxypropane (3.9 g) and 2-amino-7-methoxytetralin (2.2 g) in isopropanol (40 ml) is refluxed for 3 hours. The reaction mixture is then evaporated to dryness, the residue is dissolved in ethyl acetate and the obtained solution is washed with water, dried over sodium sulfate and evaporated to dryness. The residue is taken up in ethyl acetate/isopropanol and the obtained solution is made acidic by the addition of HCl/isopropanol. The precipitate which forms is recovered by filtration, and suspended in hot ethanol. The suspension is then cooled and filtered and the solid recovered by filtration is dried yielding 3.1 g of N-(7-methoxy-1,2,3,4-tetrahydronaphth-2-yl)-2-hydroxy-3-[1-(p-toluenesulfonyl)indol-4-yloxy]propanamine hydrochloride; m.p. 228-231 C.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Elf Sanofi; US5254595; (1993); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 366-99-4, name is 3-Fluoro-4-methoxyaniline, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 366-99-4, COA of Formula: C7H8FNO

General procedure: The procedure was performed adopting literature.46 To a solutionof ArNH2 (3, 5 mmol, dissolved in 10 mL acetic acid), wasadded aquatic solution of NaOCN (7.5 mmol, 7.5 mL). The mixturewas allowed to be stirred at room temperature for 1 h and thenconcentrated under reduced pressure. Afterwards, saturatedK2CO3 solution was added to adjust the pH to 7?8. A large scaleof precipitate was therefore formed, which was then filtered,washed with water for several times and then recrystallized fromMeOH – DCM

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Zhang, Mao; Liang, Yu-Ru; Li, Huan; Liu, Ming-Ming; Wang, Yang; Bioorganic and Medicinal Chemistry; vol. 25; 24; (2017); p. 6623 – 6634;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41365-75-7, name is 1-Amino-3,3-diethoxypropane, A new synthetic method of this compound is introduced below., Product Details of 41365-75-7

3,3-diethoxypropan-1-amine (6 g, 40.76 mmol, 1.00 equiv) was dissolved in1,4-dioxane (30 mL) in the presence of TEA (4.45 g, 43.98 mmol, 1.08 equiv), then cooled to 0C. (Boc)20 (9.6 g, 43.99 mmol, 1.08 equiv) diluted in 20 mL of 1,4- dioxane was added drop-wise. The solution was agitated 2 hours at 0C then overnight at ambient temperature before being neutralised with 10 mL of water. The pH was adjusted to 5 with HC1 (1 %). The solution was extracted 3 times with 50 mL of EtOAc.The organic phases were combined, dried over sodium sulfate, filtered and concentrated to yield 8.21 g (81 %) of compound 1ZD in the form of a pale yellow oil.

The synthetic route of 41365-75-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PIERRE FABRE MEDICAMENT; PEREZ, Michel; RILATT, Ian; LAMOTHE, Marie; WO2014/174060; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 651734-54-2 as follows. Safety of 2,6-Difluoro-3,5-dimethoxyaniline

To a stirred slurry of 2,6-difluoro-3,5-dimethoxyaniline (500 mg, 2.64 mmol) in 6.0 M hydrogen chloride in water (4 mL, 24 mmol) was added a solution of sodium nitrite (191 mg, 2.78 mmol) in water (1 mL) dropwise over 15 min at 0 C. After stirring the resulting mixture at 0 C. for another 15 min, a solution of potassium iodide (1.8 g, 10. mmol) in water (2 mL) was slowly added to the resulting orange-red slurry at 0 C. with vigorus stirring. After completion of the addition, the reaction mixture was allowed to warm up to r.t. for 1 hour. The solid was collected by filtration, washed with water and dried under vacuum. 570 mg solid was collected and used directly in the next step.

According to the analysis of related databases, 651734-54-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Incyte Corporation; Li, Zhenwu; Wu, Liangxing; Yao, Wenqing; (48 pag.)US2017/320875; (2017); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 175278-17-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 175278-17-8 name is 2-Bromo-4-(trifluoromethoxy)aniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To anhydrous copper [(II)] chloride (6.3g, 47mmol) in acetonitrile (lOOmL) was added tert-butyl nitrite (6.85mL, [58MMOL),] followed dropwise by a solution of [2-BROMO-4- (TRIFLUOROMETHOXY)] aniline (lOg, 39mmol) in acetonitrile [(15ML).] The solution was stirred at ambient temperature for 1 hour then poured into hydrochloric acid (250mL, 2M). The suspension formed was extracted with diethyl ether [(2X250ML)] and the extracts were dried [(MGS04).] Concentration yielded the title compound as an oil (7.82g, [28MMOL).] [ON] (360 MHz, [CDCL3)] : 7.51 [(1H,] d, J 3.2Hz), 7.48 [(1H,] d, J 8.8Hz), 7.15 [(1H,] dd, J 3.2 and 8.8Hz).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Bromo-4-(trifluoromethoxy)aniline, and friends who are interested can also refer to it.

Reference:
Patent; MERCK SHARP & DOHME LIMITED; WO2004/31190; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem